Gateways
With the ASi gateways from Bihl+Wiedemann you can transmit digital and analog data which have been read remotely through ASi slaves to the host controller and set the output signals from the host controller to the actuators over the respective bus system.
Our gateways communicate according to the ASi-3 resp. ASi-5 standard and therefore ensure optimal exchange of the data. They are simple and quick to install and commission. The user benefits from the variety of standard implemented diagnostics functions such as duplicate address detection, earth fault and EMC monitoring as well as an optional PLC functionality.
Double Masters in one gateway are an especially cost-efficient approach. This allows two ASi circuits to be controlled by one gateway. The “1 Gateway, 1 power supply for 2 ASi circuits” version also requires just one power supply for both ASi circuits.
24 Volt ASi Gateways in Stainless Steel
- The devices can be operated directly on a 24 V (PELV) power supply.
- With integrated data coupling coils and adjustable self-resetting fuses optimized for safe use also of powerful 24 V power supplies.
| Figure | Type | Model | "IP20": "IP40": Protected against solid foreign bodies having a diameter of 1.0 mm or larger, protected against access with a wire, no protection against water. "IP54": Protection against dust in damaging amounts, complete protection against contact, protection against splashing water in any angle.
Dust-tight, full protection against contact, protection against temporary immersion. |
Communication interface between fieldbus and gateway: interfaces for standardized fieldbus systems in industrial automation. PROFIBUS ASi gateway: interface for a PROFIBUS fieldbus
PROFIBUS ASi Basic gateway: interface for a PROFIBUS fieldbus PROFIBUS ASi IP65 gateway: interface for a PROFIBUS fieldbus EtherNet/IP+ Modbus TCP ASi gateway: interface for an EtherNet/IP+ ModbusTCP fieldbus BACnet/IP ASi gateway: interface for a BACnet/IP fieldbus Compact-/MicroLogix ASi gateway: interface for the Compact-/MicroLogix backplane POWERLINK ASi gateway: interface for an POWERLINK fieldbus OPC UA server: interface for the OPC UA communication
| Standard devices"Single Master": 1 ASi network, 1 ASi Master. 2 ASi networks, 2 ASi Masters. Safety devices "Single Master" : | " yes, max. 4 A/ASi network ": Operation with short cable lengths with standard 24 V power supply possible.
Should one ASi power supply fail, switching to the other ASi power supply allows all the diagnostics functions to be maintained and the unaffected ASi network continues to operate. 1 ASi power supply per ASi network. | Detects whether the same address has been assigned to two ASi slaves. Frequent error when using a handheld addressing device. | Checks the ASi line for interference effects such as noise, external voltages, ... | Using a C-program offers the possibility to run mini-PLC functions with a gateway. | Article No. |
|---|---|---|---|---|---|---|---|---|---|---|
 | 24 Volt ASi-5/ASi-3 Gateway | Gateway | IP20 | PROFINET, OPC UA | 1 ASi network, 1 ASi-5/ASi-3 Master | yes, max. 4 A/ASi network | yes | yes | no | BWU384724 Volt ASi-5/ASi-3 PROFINET Gateway in Stainless Steel, 1 ASi-5/ASi-3 master |
 | 24 Volt ASi-5/ASi-3 Gateway | Gateway | IP20 | EtherNet/IP + ModbusTCP, OPC UA | 1 ASi network, 1 ASi-5/ASi-3 Master | yes, max. 4 A/ASi network | yes | yes | no | BWU384924 Volt ASi-5/ASi-3 EtherNet/IP + Modbus TCP Gateway in Stainless Steel, 1 ASi-5/ASi-3 master |
 | 24 Volt ASi-5/ASi-3 Gateway | Gateway | IP20 | EtherCAT, OPC UA | 1 ASi network, 1 ASi-5/ASi-3 Master | yes, max. 4 A/ASi network | yes | yes | no | BWU385424 Volt ASi-5/ASi-3 EtherCAT Gateway in Stainless Steel, 1 ASi-5/ASi-3 master |
 | 24 Volt ASi Gateway | Gateway | IP20 | PROFIBUS | 1 ASi network, 1 ASi Master | yes, max. 4 A/ASi network | yes | yes | no | BWU305324 Volt ASi-3 PROFIBUS Gateway in Stainless Steel, 1 master |
 | 24 Volt ASi Gateway | Gateway | IP20 | PROFINET, OPC UA | 1 ASi network, 1 ASi Master | yes, max. 4 A/ASi network | yes | yes | no | BWU376024 Volt ASi-3 PROFINET Gateway in Stainless Steel, 1 master |
 | 24 Volt ASi Gateway | Gateway | IP20 | EtherNet/IP + ModbusTCP, OPC UA | 1 ASi network, 1 ASi Master | yes, max. 4 A/ASi network | yes | yes | no | BWU382224 Volt ASi-3 EtherNet/IP + Modbus TCP Gateway in Stainless Steel, 1 master |
 | 24 Volt ASi Gateway | Gateway | IP20 | EtherCAT | 1 ASi network, 1 ASi Master | yes, max. 4 A/ASi network | yes | yes | no | BWU305824 Volt ASi-3 EtherCAT Gateway in Stainless Steel, 1 master |
 | 24 Volt ASi Gateway | Gateway | IP20 | POWERLINK | 1 ASi network, 1 ASi Master | yes, max. 4 A/ASi network | yes | yes | no | BWU331224 Volt ASi-3 POWERLINK Gateway in Stainless Steel, 1 master |
 | 24 Volt ASi Gateway | Gateway | IP20 | CC-Link | 1 ASi network, 1 ASi Master | yes, max. 4 A/ASi network | yes | yes | no | BWU305124 Volt ASi-3 CC-Link Gateway in Stainless Steel, 1 master |
PROFIBUS ASi
| Figure | Type | Model | "IP20": "IP40": Protected against solid foreign bodies having a diameter of 1.0 mm or larger, protected against access with a wire, no protection against water. "IP54": Protection against dust in damaging amounts, complete protection against contact, protection against splashing water in any angle.
Dust-tight, full protection against contact, protection against temporary immersion. |
Communication interface between fieldbus and gateway: interfaces for standardized fieldbus systems in industrial automation. PROFIBUS ASi gateway: interface for a PROFIBUS fieldbus
PROFIBUS ASi Basic gateway: interface for a PROFIBUS fieldbus PROFIBUS ASi IP65 gateway: interface for a PROFIBUS fieldbus EtherNet/IP+ Modbus TCP ASi gateway: interface for an EtherNet/IP+ ModbusTCP fieldbus BACnet/IP ASi gateway: interface for a BACnet/IP fieldbus Compact-/MicroLogix ASi gateway: interface for the Compact-/MicroLogix backplane POWERLINK ASi gateway: interface for an POWERLINK fieldbus OPC UA server: interface for the OPC UA communication
| Standard devices"Single Master": 1 ASi network, 1 ASi Master. 2 ASi networks, 2 ASi Masters. Safety devices "Single Master" : | " yes, max. 4 A/ASi network ": Operation with short cable lengths with standard 24 V power supply possible.
Should one ASi power supply fail, switching to the other ASi power supply allows all the diagnostics functions to be maintained and the unaffected ASi network continues to operate. 1 ASi power supply per ASi network. | "USB": Access to ASi Master and Safety Monitor with Bihl+Wiedemann proprietary software by using the USB interface. Access to ASi Master and Safety Monitor with Bihl+Wiedemann software by using the Ethernet diagnostic interface or Ethernet fieldbus interface. Access to ASi Master and Safety Monitor with Bihl+Wiedemann software by using the Ethernet diagnostic interface. Access to ASi Master and Safety Monitor with Bihl+Wiedemann software or via Modbus TCP by using the Ethernet diagnostic interface. For a full-fledged Modbus TCP fieldbus interface use one of our Modbus TCP gateways in stainless steel or Modbus TCP gateways with integrated safety monitor. Access to ASi Master and Safety Monitor with Bihl+Wiedemann software by using the Ethernet fieldbus interface or by using an adapter cable via RS 232 interface.
Access to ASi Master and Safety Monitor with Bihl+Wiedemann software by using an adapter cable via RS 232 interface. The latest version of the device description file of the gateway/gateway with integrated safety monitor (GSD, GSDML, EDS, etc.) is available in the "Downloads" section of the respective device. | Detects whether the same address has been assigned to two ASi slaves. Frequent error when using a handheld addressing device. | Checks the ASi line for interference effects such as noise, external voltages, ... | Using a C-program offers the possibility to run mini-PLC functions with a gateway. | Article No. |
|---|---|---|---|---|---|---|---|---|---|---|---|
 | PROFIBUS ASi | Gateway | IP20 | PROFIBUS | 2 ASi networks, 2 ASi Masters | yes, max. 4 A/ASi network | Ethernet diagnostic | yes | yes | optional | BWU2546ASi-3 PROFIBUS Gateway in Stainless Steel, 2 masters |
| PROFIBUS ASi | Gateway | IP20 | PROFIBUS | 2 ASi networks, 2 ASi Masters | no, max. 8 A/ASi network, redundant supply | Ethernet diagnostic | yes | yes | optional | BWU2545ASi-3 PROFIBUS Gateway in Stainless Steel, 2 masters |
| PROFIBUS ASi | Gateway | IP20 | PROFIBUS | 2 ASi networks, 2 ASi Masters | no, max. 8 A/ASi network | - | no | yes | no | BWU1774ASi-3 PROFIBUS Gateway in Stainless Steel, 2 masters |
| PROFIBUS ASi | Gateway | IP20 | PROFIBUS | 1 ASi network, 1 ASi Master | yes, max. 4 A/ASi network | Ethernet diagnostic | yes | yes | optional | BWU2775ASi-3 PROFIBUS Gateway in Stainless Steel, 1 master |
| PROFIBUS ASi | Gateway | IP20 | PROFIBUS | 1 ASi network, 1 ASi Master | no, max. 8 A/ASi network | Ethernet diagnostic | yes | yes | optional | BWU2544ASi-3 PROFIBUS Gateway in Stainless Steel, 1 master |
| PROFIBUS ASi | Gateway | IP20 | PROFIBUS | 1 ASi network, 1 ASi Master | no, max. 8 A/ASi network | - | no | yes | no | BWU1773ASi-3 PROFIBUS Gateway in Stainless Steel, 1 master |
| 24 Volt ASi Gateway | Gateway | IP20 | PROFIBUS | 1 ASi network, 1 ASi Master | yes, max. 4 A/ASi network | - | yes | yes | no | BWU305324 Volt ASi-3 PROFIBUS Gateway in Stainless Steel, 1 master |
 | PROFIBUS ASi Basic | Gateway | IP20 | PROFIBUS | 1 ASi network, 1 ASi Master | no, max. 8 A/ASi network | - | no | yes | no | BWU1746ASi-3 PROFIBUS Gateway in Stainless Steel, 1 master |
 | Starter Kits | Gateway | IP20 | PROFIBUS | 2 ASi networks, 2 ASi Masters | yes, max. 4 A/ASi network | Ethernet diagnostic | yes | yes | optional | BW2726Gateway with programming in C Starter Kit |
PROFINET ASi
| Figure | Type | Model | "IP20": "IP40": Protected against solid foreign bodies having a diameter of 1.0 mm or larger, protected against access with a wire, no protection against water. "IP54": Protection against dust in damaging amounts, complete protection against contact, protection against splashing water in any angle.
Dust-tight, full protection against contact, protection against temporary immersion. |
Communication interface between fieldbus and gateway: interfaces for standardized fieldbus systems in industrial automation. PROFIBUS ASi gateway: interface for a PROFIBUS fieldbus
PROFIBUS ASi Basic gateway: interface for a PROFIBUS fieldbus PROFIBUS ASi IP65 gateway: interface for a PROFIBUS fieldbus EtherNet/IP+ Modbus TCP ASi gateway: interface for an EtherNet/IP+ ModbusTCP fieldbus BACnet/IP ASi gateway: interface for a BACnet/IP fieldbus Compact-/MicroLogix ASi gateway: interface for the Compact-/MicroLogix backplane POWERLINK ASi gateway: interface for an POWERLINK fieldbus OPC UA server: interface for the OPC UA communication
| Standard devices"Single Master": 1 ASi network, 1 ASi Master. 2 ASi networks, 2 ASi Masters. Safety devices "Single Master" : | " yes, max. 4 A/ASi network ": Operation with short cable lengths with standard 24 V power supply possible.
Should one ASi power supply fail, switching to the other ASi power supply allows all the diagnostics functions to be maintained and the unaffected ASi network continues to operate. 1 ASi power supply per ASi network. | "USB": Access to ASi Master and Safety Monitor with Bihl+Wiedemann proprietary software by using the USB interface. Access to ASi Master and Safety Monitor with Bihl+Wiedemann software by using the Ethernet diagnostic interface or Ethernet fieldbus interface. Access to ASi Master and Safety Monitor with Bihl+Wiedemann software by using the Ethernet diagnostic interface. Access to ASi Master and Safety Monitor with Bihl+Wiedemann software or via Modbus TCP by using the Ethernet diagnostic interface. For a full-fledged Modbus TCP fieldbus interface use one of our Modbus TCP gateways in stainless steel or Modbus TCP gateways with integrated safety monitor. Access to ASi Master and Safety Monitor with Bihl+Wiedemann software by using the Ethernet fieldbus interface or by using an adapter cable via RS 232 interface.
Access to ASi Master and Safety Monitor with Bihl+Wiedemann software by using an adapter cable via RS 232 interface. The latest version of the device description file of the gateway/gateway with integrated safety monitor (GSD, GSDML, EDS, etc.) is available in the "Downloads" section of the respective device. | Detects whether the same address has been assigned to two ASi slaves. Frequent error when using a handheld addressing device. | Checks the ASi line for interference effects such as noise, external voltages, ... | Using a C-program offers the possibility to run mini-PLC functions with a gateway. | Article No. |
|---|---|---|---|---|---|---|---|---|---|---|---|
 | PROFINET ASi | Gateway | IP20 | PROFINET, OPC UA | 2 ASi networks, 2 ASi Masters | yes, max. 4 A/ASi network | Ethernet fieldbus | yes | yes | optional | BWU3759ASi-3 PROFINET Gateway in Stainless Steel, 2 masters |
| PROFINET ASi | Gateway | IP20 | PROFINET, OPC UA | 2 ASi networks, 2 ASi Masters | no, max. 8 A/ASi network, redundant supply | Ethernet fieldbus | yes | yes | optional | BWU3844ASi-3 PROFINET Gateway in Stainless Steel, 2 masters |
| PROFINET ASi | Gateway | IP20 | PROFINET, OPC UA | 1 ASi network, 1 ASi Master | no, max. 8 A/ASi network | Ethernet fieldbus | yes | yes | optional | BWU3758ASi-3 PROFINET Gateway in Stainless Steel, 1 master |
 | PROFINET ASi | Gateway | IP20 | PROFINET | 1 ASi network, 1 ASi Master | no, max. 8 A/ASi network | Ethernet fieldbus + Ethernet diagnostic | yes | yes | optional | BWU3431ASi-3 PROFINET Gateway in Stainless Steel, 1 master |
| 24 Volt ASi-5/ASi-3 Gateway | Gateway | IP20 | PROFINET, OPC UA | 1 ASi network, 1 ASi-5/ASi-3 Master | yes, max. 4 A/ASi network | Ethernet fieldbus | yes | yes | no | BWU384724 Volt ASi-5/ASi-3 PROFINET Gateway in Stainless Steel, 1 ASi-5/ASi-3 master |
| 24 Volt ASi Gateway | Gateway | IP20 | PROFINET, OPC UA | 1 ASi network, 1 ASi Master | yes, max. 4 A/ASi network | Ethernet fieldbus | yes | yes | no | BWU376024 Volt ASi-3 PROFINET Gateway in Stainless Steel, 1 master |
 | Starter Kits | Gateway | IP20 | PROFINET, OPC UA | 1 ASi network, 1 ASi-5/ASi-3 Master | yes, max. 4 A/ASi network | Ethernet fieldbus | yes | yes | - | BW4211Small Starter Kit ASi-5/IO-Link |
EtherNet/IP + ModbusTCP ASi
| Figure | Type | Model | "IP20": "IP40": Protected against solid foreign bodies having a diameter of 1.0 mm or larger, protected against access with a wire, no protection against water. "IP54": Protection against dust in damaging amounts, complete protection against contact, protection against splashing water in any angle.
Dust-tight, full protection against contact, protection against temporary immersion. |
Communication interface between fieldbus and gateway: interfaces for standardized fieldbus systems in industrial automation. PROFIBUS ASi gateway: interface for a PROFIBUS fieldbus
PROFIBUS ASi Basic gateway: interface for a PROFIBUS fieldbus PROFIBUS ASi IP65 gateway: interface for a PROFIBUS fieldbus EtherNet/IP+ Modbus TCP ASi gateway: interface for an EtherNet/IP+ ModbusTCP fieldbus BACnet/IP ASi gateway: interface for a BACnet/IP fieldbus Compact-/MicroLogix ASi gateway: interface for the Compact-/MicroLogix backplane POWERLINK ASi gateway: interface for an POWERLINK fieldbus OPC UA server: interface for the OPC UA communication
| Standard devices"Single Master": 1 ASi network, 1 ASi Master. 2 ASi networks, 2 ASi Masters. Safety devices "Single Master" : | " yes, max. 4 A/ASi network ": Operation with short cable lengths with standard 24 V power supply possible.
Should one ASi power supply fail, switching to the other ASi power supply allows all the diagnostics functions to be maintained and the unaffected ASi network continues to operate. 1 ASi power supply per ASi network. | "USB": Access to ASi Master and Safety Monitor with Bihl+Wiedemann proprietary software by using the USB interface. Access to ASi Master and Safety Monitor with Bihl+Wiedemann software by using the Ethernet diagnostic interface or Ethernet fieldbus interface. Access to ASi Master and Safety Monitor with Bihl+Wiedemann software by using the Ethernet diagnostic interface. Access to ASi Master and Safety Monitor with Bihl+Wiedemann software or via Modbus TCP by using the Ethernet diagnostic interface. For a full-fledged Modbus TCP fieldbus interface use one of our Modbus TCP gateways in stainless steel or Modbus TCP gateways with integrated safety monitor. Access to ASi Master and Safety Monitor with Bihl+Wiedemann software by using the Ethernet fieldbus interface or by using an adapter cable via RS 232 interface.
Access to ASi Master and Safety Monitor with Bihl+Wiedemann software by using an adapter cable via RS 232 interface. The latest version of the device description file of the gateway/gateway with integrated safety monitor (GSD, GSDML, EDS, etc.) is available in the "Downloads" section of the respective device. | Detects whether the same address has been assigned to two ASi slaves. Frequent error when using a handheld addressing device. | Checks the ASi line for interference effects such as noise, external voltages, ... | Using a C-program offers the possibility to run mini-PLC functions with a gateway. | Article No. |
|---|---|---|---|---|---|---|---|---|---|---|---|
 | EtherNet/IP + ModbusTCP ASi | Gateway | IP20 | EtherNet/IP + ModbusTCP, OPC UA | 2 ASi networks, 2 ASi Masters | yes, max. 4 A/ASi network | Ethernet fieldbus | yes | yes | optional | BWU3736ASi-3 EtherNet/IP+ModbusTCP Gateway in Stainless Steel, 2 masters |
| EtherNet/IP + ModbusTCP ASi | Gateway | IP20 | EtherNet/IP + ModbusTCP, OPC UA | 2 ASi networks, 2 ASi Masters | no, max. 8 A/ASi network, redundant supply | Ethernet fieldbus | yes | yes | optional | BWU3735ASi-3 EtherNet/IP+ModbusTCP Gateway in Stainless Steel, 2 masters |
| EtherNet/IP + ModbusTCP ASi | Gateway | IP20 | EtherNet/IP + ModbusTCP, OPC UA | 1 ASi network, 1 ASi Master | no, max. 8 A/ASi network | Ethernet fieldbus | yes | yes | optional | BWU3734ASi-3 EtherNet/IP+ModbusTCP Gateway in Stainless Steel, 1 master |
| 24 Volt ASi Gateway | Gateway | IP20 | EtherNet/IP + ModbusTCP, OPC UA | 1 ASi network, 1 ASi Master | yes, max. 4 A/ASi network | Ethernet fieldbus | yes | yes | no | BWU382224 Volt ASi-3 EtherNet/IP + Modbus TCP Gateway in Stainless Steel, 1 master |
BACnet/IP ASi
| Figure | Type | Model | "IP20": "IP40": Protected against solid foreign bodies having a diameter of 1.0 mm or larger, protected against access with a wire, no protection against water. "IP54": Protection against dust in damaging amounts, complete protection against contact, protection against splashing water in any angle.
Dust-tight, full protection against contact, protection against temporary immersion. |
Communication interface between fieldbus and gateway: interfaces for standardized fieldbus systems in industrial automation. PROFIBUS ASi gateway: interface for a PROFIBUS fieldbus
PROFIBUS ASi Basic gateway: interface for a PROFIBUS fieldbus PROFIBUS ASi IP65 gateway: interface for a PROFIBUS fieldbus EtherNet/IP+ Modbus TCP ASi gateway: interface for an EtherNet/IP+ ModbusTCP fieldbus BACnet/IP ASi gateway: interface for a BACnet/IP fieldbus Compact-/MicroLogix ASi gateway: interface for the Compact-/MicroLogix backplane POWERLINK ASi gateway: interface for an POWERLINK fieldbus OPC UA server: interface for the OPC UA communication
| Standard devices"Single Master": 1 ASi network, 1 ASi Master. 2 ASi networks, 2 ASi Masters. Safety devices "Single Master" : | " yes, max. 4 A/ASi network ": Operation with short cable lengths with standard 24 V power supply possible.
Should one ASi power supply fail, switching to the other ASi power supply allows all the diagnostics functions to be maintained and the unaffected ASi network continues to operate. 1 ASi power supply per ASi network. | "USB": Access to ASi Master and Safety Monitor with Bihl+Wiedemann proprietary software by using the USB interface. Access to ASi Master and Safety Monitor with Bihl+Wiedemann software by using the Ethernet diagnostic interface or Ethernet fieldbus interface. Access to ASi Master and Safety Monitor with Bihl+Wiedemann software by using the Ethernet diagnostic interface. Access to ASi Master and Safety Monitor with Bihl+Wiedemann software or via Modbus TCP by using the Ethernet diagnostic interface. For a full-fledged Modbus TCP fieldbus interface use one of our Modbus TCP gateways in stainless steel or Modbus TCP gateways with integrated safety monitor. Access to ASi Master and Safety Monitor with Bihl+Wiedemann software by using the Ethernet fieldbus interface or by using an adapter cable via RS 232 interface.
Access to ASi Master and Safety Monitor with Bihl+Wiedemann software by using an adapter cable via RS 232 interface. The latest version of the device description file of the gateway/gateway with integrated safety monitor (GSD, GSDML, EDS, etc.) is available in the "Downloads" section of the respective device. | Detects whether the same address has been assigned to two ASi slaves. Frequent error when using a handheld addressing device. | Checks the ASi line for interference effects such as noise, external voltages, ... | Using a C-program offers the possibility to run mini-PLC functions with a gateway. | Article No. |
|---|---|---|---|---|---|---|---|---|---|---|---|
 | BACnet/IP ASi | Gateway | IP20 | BACnet/IP | 2 ASi networks, 2 ASi Masters | no, max. 8 A/ASi network, redundant supply | Ethernet fieldbus + Ethernet diagnostic | yes | yes | optional | BWU3356ASi-3 BACnet/IP Gateway in Stainless Steel, 2 masters |
DeviceNet ASi
| Figure | Type | Model | "IP20": "IP40": Protected against solid foreign bodies having a diameter of 1.0 mm or larger, protected against access with a wire, no protection against water. "IP54": Protection against dust in damaging amounts, complete protection against contact, protection against splashing water in any angle.
Dust-tight, full protection against contact, protection against temporary immersion. |
Communication interface between fieldbus and gateway: interfaces for standardized fieldbus systems in industrial automation. PROFIBUS ASi gateway: interface for a PROFIBUS fieldbus
PROFIBUS ASi Basic gateway: interface for a PROFIBUS fieldbus PROFIBUS ASi IP65 gateway: interface for a PROFIBUS fieldbus EtherNet/IP+ Modbus TCP ASi gateway: interface for an EtherNet/IP+ ModbusTCP fieldbus BACnet/IP ASi gateway: interface for a BACnet/IP fieldbus Compact-/MicroLogix ASi gateway: interface for the Compact-/MicroLogix backplane POWERLINK ASi gateway: interface for an POWERLINK fieldbus OPC UA server: interface for the OPC UA communication
| Standard devices"Single Master": 1 ASi network, 1 ASi Master. 2 ASi networks, 2 ASi Masters. Safety devices "Single Master" : | " yes, max. 4 A/ASi network ": Operation with short cable lengths with standard 24 V power supply possible.
Should one ASi power supply fail, switching to the other ASi power supply allows all the diagnostics functions to be maintained and the unaffected ASi network continues to operate. 1 ASi power supply per ASi network. | "USB": Access to ASi Master and Safety Monitor with Bihl+Wiedemann proprietary software by using the USB interface. Access to ASi Master and Safety Monitor with Bihl+Wiedemann software by using the Ethernet diagnostic interface or Ethernet fieldbus interface. Access to ASi Master and Safety Monitor with Bihl+Wiedemann software by using the Ethernet diagnostic interface. Access to ASi Master and Safety Monitor with Bihl+Wiedemann software or via Modbus TCP by using the Ethernet diagnostic interface. For a full-fledged Modbus TCP fieldbus interface use one of our Modbus TCP gateways in stainless steel or Modbus TCP gateways with integrated safety monitor. Access to ASi Master and Safety Monitor with Bihl+Wiedemann software by using the Ethernet fieldbus interface or by using an adapter cable via RS 232 interface.
Access to ASi Master and Safety Monitor with Bihl+Wiedemann software by using an adapter cable via RS 232 interface. The latest version of the device description file of the gateway/gateway with integrated safety monitor (GSD, GSDML, EDS, etc.) is available in the "Downloads" section of the respective device. | Detects whether the same address has been assigned to two ASi slaves. Frequent error when using a handheld addressing device. | Checks the ASi line for interference effects such as noise, external voltages, ... | Using a C-program offers the possibility to run mini-PLC functions with a gateway. | Article No. |
|---|---|---|---|---|---|---|---|---|---|---|---|
 | DeviceNet ASi | Gateway | IP20 | DeviceNet | 2 ASi networks, 2 ASi Masters | yes, max. 4 A/ASi network | RS 232 | yes | yes | no | BWU1820ASi-3 DeviceNet Gateway in Stainless Steel, 2 masters |
| DeviceNet ASi | Gateway | IP20 | DeviceNet | 2 ASi networks, 2 ASi Masters | no, max. 8 A/ASi network, redundant supply | RS 232 | yes | yes | no | BWU1819ASi-3 DeviceNet Gateway in Stainless Steel, 2 masters |
| DeviceNet ASi | Gateway | IP20 | DeviceNet | 1 ASi network, 1 ASi Master | no, max. 8 A/ASi network | RS 232 | yes | yes | no | BWU1818ASi-3 DeviceNet Gateway in Stainless Steel, 1 master |
ControlLogix ASi
| Figure | Type | Model | "IP20": "IP40": Protected against solid foreign bodies having a diameter of 1.0 mm or larger, protected against access with a wire, no protection against water. "IP54": Protection against dust in damaging amounts, complete protection against contact, protection against splashing water in any angle.
Dust-tight, full protection against contact, protection against temporary immersion. |
Communication interface between fieldbus and gateway: interfaces for standardized fieldbus systems in industrial automation. PROFIBUS ASi gateway: interface for a PROFIBUS fieldbus
PROFIBUS ASi Basic gateway: interface for a PROFIBUS fieldbus PROFIBUS ASi IP65 gateway: interface for a PROFIBUS fieldbus EtherNet/IP+ Modbus TCP ASi gateway: interface for an EtherNet/IP+ ModbusTCP fieldbus BACnet/IP ASi gateway: interface for a BACnet/IP fieldbus Compact-/MicroLogix ASi gateway: interface for the Compact-/MicroLogix backplane POWERLINK ASi gateway: interface for an POWERLINK fieldbus OPC UA server: interface for the OPC UA communication
| Standard devices"Single Master": 1 ASi network, 1 ASi Master. 2 ASi networks, 2 ASi Masters. Safety devices "Single Master" : | " yes, max. 4 A/ASi network ": Operation with short cable lengths with standard 24 V power supply possible.
Should one ASi power supply fail, switching to the other ASi power supply allows all the diagnostics functions to be maintained and the unaffected ASi network continues to operate. 1 ASi power supply per ASi network. | "USB": Access to ASi Master and Safety Monitor with Bihl+Wiedemann proprietary software by using the USB interface. Access to ASi Master and Safety Monitor with Bihl+Wiedemann software by using the Ethernet diagnostic interface or Ethernet fieldbus interface. Access to ASi Master and Safety Monitor with Bihl+Wiedemann software by using the Ethernet diagnostic interface. Access to ASi Master and Safety Monitor with Bihl+Wiedemann software or via Modbus TCP by using the Ethernet diagnostic interface. For a full-fledged Modbus TCP fieldbus interface use one of our Modbus TCP gateways in stainless steel or Modbus TCP gateways with integrated safety monitor. Access to ASi Master and Safety Monitor with Bihl+Wiedemann software by using the Ethernet fieldbus interface or by using an adapter cable via RS 232 interface.
Access to ASi Master and Safety Monitor with Bihl+Wiedemann software by using an adapter cable via RS 232 interface. The latest version of the device description file of the gateway/gateway with integrated safety monitor (GSD, GSDML, EDS, etc.) is available in the "Downloads" section of the respective device. | Detects whether the same address has been assigned to two ASi slaves. Frequent error when using a handheld addressing device. | Checks the ASi line for interference effects such as noise, external voltages, ... | Using a C-program offers the possibility to run mini-PLC functions with a gateway. | Article No. |
|---|---|---|---|---|---|---|---|---|---|---|---|
 | ControlLogix ASi | Gateway | IP20 | ControlLogix | 2 ASi networks, 2 ASi Masters | no, max. 8 A/ASi network | RS 232 | no | no | no | BWU1488ASi-3 Master/Scanner A-B ControlLogix, 2 masters |
| ControlLogix ASi | Gateway | IP20 | complete set ControlLogix | 2 ASi networks, 2 ASi Masters | no, max. 8 A/ASi network | RS 232 | no | no | no | BW1611ASi-3 Master/Scanner A-B ControlLogix, complete set, 2 masters |
Compact- / MicroLogix ASi
| Figure | Type | Model | "IP20": "IP40": Protected against solid foreign bodies having a diameter of 1.0 mm or larger, protected against access with a wire, no protection against water. "IP54": Protection against dust in damaging amounts, complete protection against contact, protection against splashing water in any angle.
Dust-tight, full protection against contact, protection against temporary immersion. |
Communication interface between fieldbus and gateway: interfaces for standardized fieldbus systems in industrial automation. PROFIBUS ASi gateway: interface for a PROFIBUS fieldbus
PROFIBUS ASi Basic gateway: interface for a PROFIBUS fieldbus PROFIBUS ASi IP65 gateway: interface for a PROFIBUS fieldbus EtherNet/IP+ Modbus TCP ASi gateway: interface for an EtherNet/IP+ ModbusTCP fieldbus BACnet/IP ASi gateway: interface for a BACnet/IP fieldbus Compact-/MicroLogix ASi gateway: interface for the Compact-/MicroLogix backplane POWERLINK ASi gateway: interface for an POWERLINK fieldbus OPC UA server: interface for the OPC UA communication
| Standard devices"Single Master": 1 ASi network, 1 ASi Master. 2 ASi networks, 2 ASi Masters. Safety devices "Single Master" : | " yes, max. 4 A/ASi network ": Operation with short cable lengths with standard 24 V power supply possible.
Should one ASi power supply fail, switching to the other ASi power supply allows all the diagnostics functions to be maintained and the unaffected ASi network continues to operate. 1 ASi power supply per ASi network. | "USB": Access to ASi Master and Safety Monitor with Bihl+Wiedemann proprietary software by using the USB interface. Access to ASi Master and Safety Monitor with Bihl+Wiedemann software by using the Ethernet diagnostic interface or Ethernet fieldbus interface. Access to ASi Master and Safety Monitor with Bihl+Wiedemann software by using the Ethernet diagnostic interface. Access to ASi Master and Safety Monitor with Bihl+Wiedemann software or via Modbus TCP by using the Ethernet diagnostic interface. For a full-fledged Modbus TCP fieldbus interface use one of our Modbus TCP gateways in stainless steel or Modbus TCP gateways with integrated safety monitor. Access to ASi Master and Safety Monitor with Bihl+Wiedemann software by using the Ethernet fieldbus interface or by using an adapter cable via RS 232 interface.
Access to ASi Master and Safety Monitor with Bihl+Wiedemann software by using an adapter cable via RS 232 interface. The latest version of the device description file of the gateway/gateway with integrated safety monitor (GSD, GSDML, EDS, etc.) is available in the "Downloads" section of the respective device. | Detects whether the same address has been assigned to two ASi slaves. Frequent error when using a handheld addressing device. | Checks the ASi line for interference effects such as noise, external voltages, ... | Using a C-program offers the possibility to run mini-PLC functions with a gateway. | Article No. |
|---|---|---|---|---|---|---|---|---|---|---|---|
 | Compact- / MicroLogix ASi | Gateway | IP20 | CompactLogix, MicroLogix1500 | 1 ASi network, 1 ASi Master | no, max. 8 A/ASi network | RS 232 | no | no | no | BWU1416ASi-3 Master/Scanner A-B CompactLogix/MicroLogix 1500, 1 master |
| Compact- / MicroLogix ASi | Gateway | IP20 | complete set CompactLogix, MicroLogix1500 | 1 ASi network, 1 ASi Master | no, max. 8 A/ASi network | RS 232 | no | no | no | BW1610ASi-3 Master/Scanner A-B CompactLogix/MicroLogix 1500, complete set, 1 master |
EtherCAT ASi
| Figure | Type | Model | "IP20": "IP40": Protected against solid foreign bodies having a diameter of 1.0 mm or larger, protected against access with a wire, no protection against water. "IP54": Protection against dust in damaging amounts, complete protection against contact, protection against splashing water in any angle.
Dust-tight, full protection against contact, protection against temporary immersion. |
Communication interface between fieldbus and gateway: interfaces for standardized fieldbus systems in industrial automation. PROFIBUS ASi gateway: interface for a PROFIBUS fieldbus
PROFIBUS ASi Basic gateway: interface for a PROFIBUS fieldbus PROFIBUS ASi IP65 gateway: interface for a PROFIBUS fieldbus EtherNet/IP+ Modbus TCP ASi gateway: interface for an EtherNet/IP+ ModbusTCP fieldbus BACnet/IP ASi gateway: interface for a BACnet/IP fieldbus Compact-/MicroLogix ASi gateway: interface for the Compact-/MicroLogix backplane POWERLINK ASi gateway: interface for an POWERLINK fieldbus OPC UA server: interface for the OPC UA communication
| Standard devices"Single Master": 1 ASi network, 1 ASi Master. 2 ASi networks, 2 ASi Masters. Safety devices "Single Master" : | " yes, max. 4 A/ASi network ": Operation with short cable lengths with standard 24 V power supply possible.
Should one ASi power supply fail, switching to the other ASi power supply allows all the diagnostics functions to be maintained and the unaffected ASi network continues to operate. 1 ASi power supply per ASi network. | "USB": Access to ASi Master and Safety Monitor with Bihl+Wiedemann proprietary software by using the USB interface. Access to ASi Master and Safety Monitor with Bihl+Wiedemann software by using the Ethernet diagnostic interface or Ethernet fieldbus interface. Access to ASi Master and Safety Monitor with Bihl+Wiedemann software by using the Ethernet diagnostic interface. Access to ASi Master and Safety Monitor with Bihl+Wiedemann software or via Modbus TCP by using the Ethernet diagnostic interface. For a full-fledged Modbus TCP fieldbus interface use one of our Modbus TCP gateways in stainless steel or Modbus TCP gateways with integrated safety monitor. Access to ASi Master and Safety Monitor with Bihl+Wiedemann software by using the Ethernet fieldbus interface or by using an adapter cable via RS 232 interface.
Access to ASi Master and Safety Monitor with Bihl+Wiedemann software by using an adapter cable via RS 232 interface. The latest version of the device description file of the gateway/gateway with integrated safety monitor (GSD, GSDML, EDS, etc.) is available in the "Downloads" section of the respective device. | Detects whether the same address has been assigned to two ASi slaves. Frequent error when using a handheld addressing device. | Checks the ASi line for interference effects such as noise, external voltages, ... | Using a C-program offers the possibility to run mini-PLC functions with a gateway. | Article No. |
|---|---|---|---|---|---|---|---|---|---|---|---|
 | EtherCAT ASi | Gateway | IP20 | EtherCAT | 2 ASi networks, 2 ASi Masters | yes, max. 4 A/ASi network | Ethernet diagnostic | yes | yes | no | BWU2720ASi-3 EtherCAT Gateway in Stainless Steel, 2 masters |
| EtherCAT ASi | Gateway | IP20 | EtherCAT | 2 ASi networks, 2 ASi Masters | no, max. 8 A/ASi network, redundant supply | RS 232 | yes | yes | no | BWU2163ASi-3 EtherCAT Gateway in Stainless Steel, 2 masters |
| EtherCAT ASi | Gateway | IP20 | EtherCAT | 1 ASi network, 1 ASi Master | no, max. 8 A/ASi network | RS 232 | yes | yes | no | BWU2162ASi-3 EtherCAT Gateway in Stainless Steel, 1 master |
| 24 Volt ASi-5/ASi-3 Gateway | Gateway | IP20 | EtherCAT, OPC UA | 1 ASi network, 1 ASi-5/ASi-3 Master | yes, max. 4 A/ASi network | Ethernet diagnostic | yes | yes | no | BWU385424 Volt ASi-5/ASi-3 EtherCAT Gateway in Stainless Steel, 1 ASi-5/ASi-3 master |
| 24 Volt ASi Gateway | Gateway | IP20 | EtherCAT | 1 ASi network, 1 ASi Master | yes, max. 4 A/ASi network | Ethernet fieldbus | yes | yes | no | BWU305824 Volt ASi-3 EtherCAT Gateway in Stainless Steel, 1 master |
CC-Link ASi
| Figure | Type | Model | "IP20": "IP40": Protected against solid foreign bodies having a diameter of 1.0 mm or larger, protected against access with a wire, no protection against water. "IP54": Protection against dust in damaging amounts, complete protection against contact, protection against splashing water in any angle.
Dust-tight, full protection against contact, protection against temporary immersion. |
Communication interface between fieldbus and gateway: interfaces for standardized fieldbus systems in industrial automation. PROFIBUS ASi gateway: interface for a PROFIBUS fieldbus
PROFIBUS ASi Basic gateway: interface for a PROFIBUS fieldbus PROFIBUS ASi IP65 gateway: interface for a PROFIBUS fieldbus EtherNet/IP+ Modbus TCP ASi gateway: interface for an EtherNet/IP+ ModbusTCP fieldbus BACnet/IP ASi gateway: interface for a BACnet/IP fieldbus Compact-/MicroLogix ASi gateway: interface for the Compact-/MicroLogix backplane POWERLINK ASi gateway: interface for an POWERLINK fieldbus OPC UA server: interface for the OPC UA communication
| Standard devices"Single Master": 1 ASi network, 1 ASi Master. 2 ASi networks, 2 ASi Masters. Safety devices "Single Master" : | " yes, max. 4 A/ASi network ": Operation with short cable lengths with standard 24 V power supply possible.
Should one ASi power supply fail, switching to the other ASi power supply allows all the diagnostics functions to be maintained and the unaffected ASi network continues to operate. 1 ASi power supply per ASi network. | Detects whether the same address has been assigned to two ASi slaves. Frequent error when using a handheld addressing device. | Checks the ASi line for interference effects such as noise, external voltages, ... | Using a C-program offers the possibility to run mini-PLC functions with a gateway. | Article No. |
|---|---|---|---|---|---|---|---|---|---|---|
 | CC-Link ASi | Gateway | IP20 | CC-Link | 1 ASi network, 1 ASi Master | no, max. 8 A/ASi network | no | yes | no | BWU2611ASi-3 CC-Link Gateway in Stainless Steel, 1 master |
| 24 Volt ASi Gateway | Gateway | IP20 | CC-Link | 1 ASi network, 1 ASi Master | yes, max. 4 A/ASi network | yes | yes | no | BWU305124 Volt ASi-3 CC-Link Gateway in Stainless Steel, 1 master |
POWERLINK ASi
| Figure | Type | Model | "IP20": "IP40": Protected against solid foreign bodies having a diameter of 1.0 mm or larger, protected against access with a wire, no protection against water. "IP54": Protection against dust in damaging amounts, complete protection against contact, protection against splashing water in any angle.
Dust-tight, full protection against contact, protection against temporary immersion. |
Communication interface between fieldbus and gateway: interfaces for standardized fieldbus systems in industrial automation. PROFIBUS ASi gateway: interface for a PROFIBUS fieldbus
PROFIBUS ASi Basic gateway: interface for a PROFIBUS fieldbus PROFIBUS ASi IP65 gateway: interface for a PROFIBUS fieldbus EtherNet/IP+ Modbus TCP ASi gateway: interface for an EtherNet/IP+ ModbusTCP fieldbus BACnet/IP ASi gateway: interface for a BACnet/IP fieldbus Compact-/MicroLogix ASi gateway: interface for the Compact-/MicroLogix backplane POWERLINK ASi gateway: interface for an POWERLINK fieldbus OPC UA server: interface for the OPC UA communication
| Standard devices"Single Master": 1 ASi network, 1 ASi Master. 2 ASi networks, 2 ASi Masters. Safety devices "Single Master" : | " yes, max. 4 A/ASi network ": Operation with short cable lengths with standard 24 V power supply possible.
Should one ASi power supply fail, switching to the other ASi power supply allows all the diagnostics functions to be maintained and the unaffected ASi network continues to operate. 1 ASi power supply per ASi network. | "USB": Access to ASi Master and Safety Monitor with Bihl+Wiedemann proprietary software by using the USB interface. Access to ASi Master and Safety Monitor with Bihl+Wiedemann software by using the Ethernet diagnostic interface or Ethernet fieldbus interface. Access to ASi Master and Safety Monitor with Bihl+Wiedemann software by using the Ethernet diagnostic interface. Access to ASi Master and Safety Monitor with Bihl+Wiedemann software or via Modbus TCP by using the Ethernet diagnostic interface. For a full-fledged Modbus TCP fieldbus interface use one of our Modbus TCP gateways in stainless steel or Modbus TCP gateways with integrated safety monitor. Access to ASi Master and Safety Monitor with Bihl+Wiedemann software by using the Ethernet fieldbus interface or by using an adapter cable via RS 232 interface.
Access to ASi Master and Safety Monitor with Bihl+Wiedemann software by using an adapter cable via RS 232 interface. The latest version of the device description file of the gateway/gateway with integrated safety monitor (GSD, GSDML, EDS, etc.) is available in the "Downloads" section of the respective device. | Detects whether the same address has been assigned to two ASi slaves. Frequent error when using a handheld addressing device. | Checks the ASi line for interference effects such as noise, external voltages, ... | Using a C-program offers the possibility to run mini-PLC functions with a gateway. | Article No. |
|---|---|---|---|---|---|---|---|---|---|---|---|
 | POWERLINK ASi | Gateway | IP20 | POWERLINK | 2 ASi networks, 2 ASi Masters | yes, max. 4 A/ASi network | Ethernet diagnostic | yes | yes | optional | BWU3593ASi-3 POWERLINK Gateway in Stainless Steel, 2 ASi masters |
| POWERLINK ASi | Gateway | IP20 | POWERLINK | 2 ASi networks, 2 ASi Masters | no, max. 8 A/ASi network, redundant supply | Ethernet diagnostic | yes | yes | optional | BWU3537ASi-3 POWERLINK Gateway in Stainless Steel, 2 ASi masters |
| 24 Volt ASi Gateway | Gateway | IP20 | POWERLINK | 1 ASi network, 1 ASi Master | yes, max. 4 A/ASi network | - | yes | yes | no | BWU331224 Volt ASi-3 POWERLINK Gateway in Stainless Steel, 1 master |
CANopen ASi
| Figure | Type | Model | "IP20": "IP40": Protected against solid foreign bodies having a diameter of 1.0 mm or larger, protected against access with a wire, no protection against water. "IP54": Protection against dust in damaging amounts, complete protection against contact, protection against splashing water in any angle.
Dust-tight, full protection against contact, protection against temporary immersion. |
Communication interface between fieldbus and gateway: interfaces for standardized fieldbus systems in industrial automation. PROFIBUS ASi gateway: interface for a PROFIBUS fieldbus
PROFIBUS ASi Basic gateway: interface for a PROFIBUS fieldbus PROFIBUS ASi IP65 gateway: interface for a PROFIBUS fieldbus EtherNet/IP+ Modbus TCP ASi gateway: interface for an EtherNet/IP+ ModbusTCP fieldbus BACnet/IP ASi gateway: interface for a BACnet/IP fieldbus Compact-/MicroLogix ASi gateway: interface for the Compact-/MicroLogix backplane POWERLINK ASi gateway: interface for an POWERLINK fieldbus OPC UA server: interface for the OPC UA communication
| Standard devices"Single Master": 1 ASi network, 1 ASi Master. 2 ASi networks, 2 ASi Masters. Safety devices "Single Master" : | " yes, max. 4 A/ASi network ": Operation with short cable lengths with standard 24 V power supply possible.
Should one ASi power supply fail, switching to the other ASi power supply allows all the diagnostics functions to be maintained and the unaffected ASi network continues to operate. 1 ASi power supply per ASi network. | "USB": Access to ASi Master and Safety Monitor with Bihl+Wiedemann proprietary software by using the USB interface. Access to ASi Master and Safety Monitor with Bihl+Wiedemann software by using the Ethernet diagnostic interface or Ethernet fieldbus interface. Access to ASi Master and Safety Monitor with Bihl+Wiedemann software by using the Ethernet diagnostic interface. Access to ASi Master and Safety Monitor with Bihl+Wiedemann software or via Modbus TCP by using the Ethernet diagnostic interface. For a full-fledged Modbus TCP fieldbus interface use one of our Modbus TCP gateways in stainless steel or Modbus TCP gateways with integrated safety monitor. Access to ASi Master and Safety Monitor with Bihl+Wiedemann software by using the Ethernet fieldbus interface or by using an adapter cable via RS 232 interface.
Access to ASi Master and Safety Monitor with Bihl+Wiedemann software by using an adapter cable via RS 232 interface. The latest version of the device description file of the gateway/gateway with integrated safety monitor (GSD, GSDML, EDS, etc.) is available in the "Downloads" section of the respective device. | Detects whether the same address has been assigned to two ASi slaves. Frequent error when using a handheld addressing device. | Checks the ASi line for interference effects such as noise, external voltages, ... | Using a C-program offers the possibility to run mini-PLC functions with a gateway. | Article No. |
|---|---|---|---|---|---|---|---|---|---|---|---|
 | CANopen ASi | Gateway | IP20 | CANopen | 2 ASi networks, 2 ASi Masters | yes, max. 4 A/ASi network | RS 232 | yes | yes | no | BWU1823ASi-3 CANopen Gateway in Stainless Steel, 2 masters |
| CANopen ASi | Gateway | IP20 | CANopen | 2 ASi networks, 2 ASi Masters | no, max. 8 A/ASi network, redundant supply | RS 232 | yes | yes | no | BWU1822ASi-3 CANopen Gateway in Stainless Steel, 2 masters |
| CANopen ASi | Gateway | IP20 | CANopen | 1 ASi network, 1 ASi Master | no, max. 8 A/ASi network | RS 232 | yes | yes | no | BWU1821ASi-3 CANopen Gateway in Stainless Steel, 1 master |
RS 485 Modbus ASi
| Figure | Type | Model | "IP20": "IP40": Protected against solid foreign bodies having a diameter of 1.0 mm or larger, protected against access with a wire, no protection against water. "IP54": Protection against dust in damaging amounts, complete protection against contact, protection against splashing water in any angle.
Dust-tight, full protection against contact, protection against temporary immersion. |
Communication interface between fieldbus and gateway: interfaces for standardized fieldbus systems in industrial automation. PROFIBUS ASi gateway: interface for a PROFIBUS fieldbus
PROFIBUS ASi Basic gateway: interface for a PROFIBUS fieldbus PROFIBUS ASi IP65 gateway: interface for a PROFIBUS fieldbus EtherNet/IP+ Modbus TCP ASi gateway: interface for an EtherNet/IP+ ModbusTCP fieldbus BACnet/IP ASi gateway: interface for a BACnet/IP fieldbus Compact-/MicroLogix ASi gateway: interface for the Compact-/MicroLogix backplane POWERLINK ASi gateway: interface for an POWERLINK fieldbus OPC UA server: interface for the OPC UA communication
| Standard devices"Single Master": 1 ASi network, 1 ASi Master. 2 ASi networks, 2 ASi Masters. Safety devices "Single Master" : | " yes, max. 4 A/ASi network ": Operation with short cable lengths with standard 24 V power supply possible.
Should one ASi power supply fail, switching to the other ASi power supply allows all the diagnostics functions to be maintained and the unaffected ASi network continues to operate. 1 ASi power supply per ASi network. | "USB": Access to ASi Master and Safety Monitor with Bihl+Wiedemann proprietary software by using the USB interface. Access to ASi Master and Safety Monitor with Bihl+Wiedemann software by using the Ethernet diagnostic interface or Ethernet fieldbus interface. Access to ASi Master and Safety Monitor with Bihl+Wiedemann software by using the Ethernet diagnostic interface. Access to ASi Master and Safety Monitor with Bihl+Wiedemann software or via Modbus TCP by using the Ethernet diagnostic interface. For a full-fledged Modbus TCP fieldbus interface use one of our Modbus TCP gateways in stainless steel or Modbus TCP gateways with integrated safety monitor. Access to ASi Master and Safety Monitor with Bihl+Wiedemann software by using the Ethernet fieldbus interface or by using an adapter cable via RS 232 interface.
Access to ASi Master and Safety Monitor with Bihl+Wiedemann software by using an adapter cable via RS 232 interface. The latest version of the device description file of the gateway/gateway with integrated safety monitor (GSD, GSDML, EDS, etc.) is available in the "Downloads" section of the respective device. | Detects whether the same address has been assigned to two ASi slaves. Frequent error when using a handheld addressing device. | Checks the ASi line for interference effects such as noise, external voltages, ... | Using a C-program offers the possibility to run mini-PLC functions with a gateway. | Article No. |
|---|---|---|---|---|---|---|---|---|---|---|---|
 | RS 485 Modbus ASi | Gateway | IP20 | Modbus/RTU; RS 485 | 2 ASi networks, 2 ASi Masters | yes, max. 4 A/ASi network | RS 232 | yes | yes | no | BWU1643ASi-3 Modbus Gateway in Stainless Steel, 2 masters |
| RS 485 Modbus ASi | Gateway | IP20 | Modbus/RTU; RS 485 | 2 ASi networks, 2 ASi Masters | no, max. 8 A/ASi network, redundant supply | RS 232 | yes | yes | no | BWU1642ASi-3 Modbus Gateway in Stainless Steel, 2 masters |
| RS 485 Modbus ASi | Gateway | IP20 | Modbus/RTU; RS 485 | 1 ASi network, 1 ASi Master | no, max. 8 A/ASi network | RS 232 | yes | yes | no | BWU1641ASi-3 Modbus Gateway in Stainless Steel, 1 master |
RS232 ASi
| Figure | Type | Model | "IP20": "IP40": Protected against solid foreign bodies having a diameter of 1.0 mm or larger, protected against access with a wire, no protection against water. "IP54": Protection against dust in damaging amounts, complete protection against contact, protection against splashing water in any angle.
Dust-tight, full protection against contact, protection against temporary immersion. |
Communication interface between fieldbus and gateway: interfaces for standardized fieldbus systems in industrial automation. PROFIBUS ASi gateway: interface for a PROFIBUS fieldbus
PROFIBUS ASi Basic gateway: interface for a PROFIBUS fieldbus PROFIBUS ASi IP65 gateway: interface for a PROFIBUS fieldbus EtherNet/IP+ Modbus TCP ASi gateway: interface for an EtherNet/IP+ ModbusTCP fieldbus BACnet/IP ASi gateway: interface for a BACnet/IP fieldbus Compact-/MicroLogix ASi gateway: interface for the Compact-/MicroLogix backplane POWERLINK ASi gateway: interface for an POWERLINK fieldbus OPC UA server: interface for the OPC UA communication
| Standard devices"Single Master": 1 ASi network, 1 ASi Master. 2 ASi networks, 2 ASi Masters. Safety devices "Single Master" : | " yes, max. 4 A/ASi network ": Operation with short cable lengths with standard 24 V power supply possible.
Should one ASi power supply fail, switching to the other ASi power supply allows all the diagnostics functions to be maintained and the unaffected ASi network continues to operate. 1 ASi power supply per ASi network. | Detects whether the same address has been assigned to two ASi slaves. Frequent error when using a handheld addressing device. | Checks the ASi line for interference effects such as noise, external voltages, ... | Using a C-program offers the possibility to run mini-PLC functions with a gateway. | Article No. |
|---|---|---|---|---|---|---|---|---|---|---|
 | RS 232 ASi | Gateway | IP20 | RS 232 | 1 ASi network, 1 ASi Master | no, max. 8 A/ASi network | no | yes | no | BWU1955ASi-3 RS 232 Master in Stainless Steel, 1 master |
Safety, PROFIBUS
| Figure | Type | Model | "IP20": "IP40": Protected against solid foreign bodies having a diameter of 1.0 mm or larger, protected against access with a wire, no protection against water. "IP54": Protection against dust in damaging amounts, complete protection against contact, protection against splashing water in any angle.
Dust-tight, full protection against contact, protection against temporary immersion. |
Communication interface between fieldbus and gateway: interfaces for standardized fieldbus systems in industrial automation. PROFIBUS ASi gateway: interface for a PROFIBUS fieldbus
PROFIBUS ASi Basic gateway: interface for a PROFIBUS fieldbus PROFIBUS ASi IP65 gateway: interface for a PROFIBUS fieldbus EtherNet/IP+ Modbus TCP ASi gateway: interface for an EtherNet/IP+ ModbusTCP fieldbus BACnet/IP ASi gateway: interface for a BACnet/IP fieldbus Compact-/MicroLogix ASi gateway: interface for the Compact-/MicroLogix backplane POWERLINK ASi gateway: interface for an POWERLINK fieldbus OPC UA server: interface for the OPC UA communication
| Standard devices"Single Master": 1 ASi network, 1 ASi Master. 2 ASi networks, 2 ASi Masters. Safety devices "Single Master" : | " yes, max. 4 A/ASi network ": Operation with short cable lengths with standard 24 V power supply possible.
Should one ASi power supply fail, switching to the other ASi power supply allows all the diagnostics functions to be maintained and the unaffected ASi network continues to operate. 1 ASi power supply per ASi network. | "USB": Access to ASi Master and Safety Monitor with Bihl+Wiedemann proprietary software by using the USB interface. Access to ASi Master and Safety Monitor with Bihl+Wiedemann software by using the Ethernet diagnostic interface or Ethernet fieldbus interface. Access to ASi Master and Safety Monitor with Bihl+Wiedemann software by using the Ethernet diagnostic interface. Access to ASi Master and Safety Monitor with Bihl+Wiedemann software or via Modbus TCP by using the Ethernet diagnostic interface. For a full-fledged Modbus TCP fieldbus interface use one of our Modbus TCP gateways in stainless steel or Modbus TCP gateways with integrated safety monitor. Access to ASi Master and Safety Monitor with Bihl+Wiedemann software by using the Ethernet fieldbus interface or by using an adapter cable via RS 232 interface.
Access to ASi Master and Safety Monitor with Bihl+Wiedemann software by using an adapter cable via RS 232 interface. The latest version of the device description file of the gateway/gateway with integrated safety monitor (GSD, GSDML, EDS, etc.) is available in the "Downloads" section of the respective device. | Detects whether the same address has been assigned to two ASi slaves. Frequent error when using a handheld addressing device. | Checks the ASi line for interference effects such as noise, external voltages, ... | Using a C-program offers the possibility to run mini-PLC functions with a gateway. | An externally connected relay (contactor) can be connected via a feedback loop to the Safety Monitor for monitoring purposes. | Inputs Safety, SIL 3, Cat. 4 | Inputs safety, expandable to | Outputs Safety, SIL 3, cat. 4 | Safety outputs, independent according to SIL 3, expandable to | Safety communication | Article No. |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
 | PROFIsafe, PROFIBUS | Gateway with integrated Safety Monitor | IP20 | PROFIBUS | 2 ASi networks, 2 ASi Masters | yes, max. 4 A/ASi network | Ethernet diagnostic | yes | yes | optional | 4 | - | max. 62 x 2 channels | 4 release circuits; 2 x relay, 2 x electronic safe outputs | max. 16 | PROFIsafe (F-CPU) + ASIMON program | BWU2615ASi-3 PROFIsafe via PROFIBUS Gateway with integrated Safety Monitor, 2 ASi masters |
| PROFIsafe, PROFIBUS | Gateway with integrated Safety Monitor | IP20 | PROFIBUS | 2 ASi networks, 1 ASi Master | yes, max. 4 A/ASi network | Ethernet diagnostic | yes | yes | optional | 4 | - | max. 62 x 2 channels | 4 release circuits; 2 x relay, 2 x electronic safe outputs | max. 16 | PROFIsafe (F-CPU) + ASIMON program | BWU2598ASi-3 PROFIsafe via PROFIBUS Gateway with integrated Safety Monitor, 1 ASi master |
 | PROFIsafe, PROFIBUS | Gateway with integrated Safety Monitor | IP20 | PROFIBUS | 1 ASi network, 1 ASi Master | yes, max. 4 A/ASi network | Ethernet diagnostic | yes | yes | optional | 6 | 3 x 2 channels | max. 31 x 2 channels | 6 release circuits; 6 x electronic safe outputs | max. 31 | PROFIsafe (F-CPU) + ASIMON program | BWU2819ASi-3 PROFIsafe via PROFIBUS Gateway with integrated Safety Monitor, 1 ASi master |
| PROFIsafe, PROFIBUS | Gateway with integrated Safety Monitor | IP20 | PROFIBUS | 1 ASi network, 1 ASi Master | yes, max. 4 A/ASi network | RS 232 | yes | yes | no | - | - | max. 31 x 2 channels | - | max. 16 | PROFIsafe (F-CPU) | BWU2479ASi-3 PROFIsafe via PROFIBUS Gateway with integrated Safety Monitor, 1 ASi master |
 | Safety, PROFIBUS | Gateway with integrated Safety Monitor | IP20 | PROFIBUS | 2 ASi networks, 2 ASi Masters | yes, max. 4 A/ASi network | Ethernet diagnostic | yes | yes | optional | 6 | 3 x 2 channels | max. 62 x 2 channels, max. 1922 in max. configuration | 6 release circuits; 6 x electronic safe outputs | max. 32, max. 992 in max. configuration | Safe Link | BWU2822ASi-3 PROFIBUS Gateway with integrated Safety Monitor, 2 ASi masters |
 | Safety, PROFIBUS | Gateway with integrated Safety Monitor | IP20 | PROFIBUS | 2 ASi networks, 2 ASi Masters | yes, max. 4 A/ASi network | Ethernet diagnostic | yes | yes | optional | 4 | - | max. 62 x 2 channels, max. 1922 in max. configuration | 4 release circuits; 2 x relay, 2 x electronic safe outputs | max. 32, max. 992 in max. configuration | Safe Link | BWU2602ASi-3 PROFIBUS Gateway with integrated Safety Monitor, 2 ASi masters |
| Safety, PROFIBUS | Gateway with integrated Safety Monitor | IP20 | PROFIBUS | 2 ASi networks, 2 ASi Masters | yes, max. 4 A/ASi network | Ethernet diagnostic | yes | yes | no | 4 | - | max. 62 x 2 channels | 4 release circuits; 2 x relay, 2 x electronic safe outputs | max. 16 | - | BWU2202ASi-3 PROFIBUS Gateway with integrated Safety Monitor, 2 ASi masters |
| Safety, PROFIBUS | Gateway with integrated Safety Monitor | IP20 | PROFIBUS | 2 ASi networks, 1 ASi Master | yes, max. 4 A/ASi network | Ethernet diagnostic | yes | yes | no | 4 | - | max. 62 x 2 channels | 4 release circuits; 2 x relay, 2 x electronic safe outputs | max. 16 | - | BWU2204ASi-3 PROFIBUS Gateway with integrated Safety Monitor, 1 ASi master |
| Safety, PROFIBUS | Gateway with integrated Safety Monitor | IP20 | PROFIBUS | 2 ASi networks, 1 ASi Master | yes, max. 4 A/ASi network | Ethernet diagnostic | yes | yes | no | 4 | - | max. 62 x 2 channels | 2 release circuits; 2 x 2 relay | max. 16 | - | BWU2206ASi-3 PROFIBUS Gateway with integrated Safety Monitor, 1 ASi master |
| Safety, PROFIBUS | Gateway with integrated Safety Monitor | IP20 | PROFIBUS | 1 ASi network, 1 ASi Master | yes, max. 4 A/ASi network | Ethernet diagnostic | yes | yes | optional | 6 | 3 x 2 channels | max. 31 x 2 channels, max. 1891 in max. configuration | 6 release circuits; 6 x electronic safe outputs | max. 31, max. 991 in max. configuration | Safe Link | BWU2793ASi-3 PROFIBUS Gateway with integrated Safety Monitor, 1 ASi master |
 | Starter Kits | Gateway with integrated Safety Monitor | IP20 | PROFIBUS | 2 ASi networks, 2 ASi Masters | yes, max. 4 A/ASi network | Ethernet diagnostic | yes | yes | optional | 4 | - | max. 62 x 2 channels, max. 1922 in max. configuration | 4 release circuits; 2 x relay, 2 x electronic safe outputs | max. 32, max. 992 in max. configuration | Safe Link | BW2695Safety Gateways in Stainless Steel Starter Kit |
Safety, PROFINET
| Figure | Type | Model | "IP20": "IP40": Protected against solid foreign bodies having a diameter of 1.0 mm or larger, protected against access with a wire, no protection against water. "IP54": Protection against dust in damaging amounts, complete protection against contact, protection against splashing water in any angle.
Dust-tight, full protection against contact, protection against temporary immersion. |
Communication interface between fieldbus and gateway: interfaces for standardized fieldbus systems in industrial automation. PROFIBUS ASi gateway: interface for a PROFIBUS fieldbus
PROFIBUS ASi Basic gateway: interface for a PROFIBUS fieldbus PROFIBUS ASi IP65 gateway: interface for a PROFIBUS fieldbus EtherNet/IP+ Modbus TCP ASi gateway: interface for an EtherNet/IP+ ModbusTCP fieldbus BACnet/IP ASi gateway: interface for a BACnet/IP fieldbus Compact-/MicroLogix ASi gateway: interface for the Compact-/MicroLogix backplane POWERLINK ASi gateway: interface for an POWERLINK fieldbus OPC UA server: interface for the OPC UA communication
| Standard devices"Single Master": 1 ASi network, 1 ASi Master. 2 ASi networks, 2 ASi Masters. Safety devices "Single Master" : | " yes, max. 4 A/ASi network ": Operation with short cable lengths with standard 24 V power supply possible.
Should one ASi power supply fail, switching to the other ASi power supply allows all the diagnostics functions to be maintained and the unaffected ASi network continues to operate. 1 ASi power supply per ASi network. | "USB": Access to ASi Master and Safety Monitor with Bihl+Wiedemann proprietary software by using the USB interface. Access to ASi Master and Safety Monitor with Bihl+Wiedemann software by using the Ethernet diagnostic interface or Ethernet fieldbus interface. Access to ASi Master and Safety Monitor with Bihl+Wiedemann software by using the Ethernet diagnostic interface. Access to ASi Master and Safety Monitor with Bihl+Wiedemann software or via Modbus TCP by using the Ethernet diagnostic interface. For a full-fledged Modbus TCP fieldbus interface use one of our Modbus TCP gateways in stainless steel or Modbus TCP gateways with integrated safety monitor. Access to ASi Master and Safety Monitor with Bihl+Wiedemann software by using the Ethernet fieldbus interface or by using an adapter cable via RS 232 interface.
Access to ASi Master and Safety Monitor with Bihl+Wiedemann software by using an adapter cable via RS 232 interface. The latest version of the device description file of the gateway/gateway with integrated safety monitor (GSD, GSDML, EDS, etc.) is available in the "Downloads" section of the respective device. | Detects whether the same address has been assigned to two ASi slaves. Frequent error when using a handheld addressing device. | Checks the ASi line for interference effects such as noise, external voltages, ... | Using a C-program offers the possibility to run mini-PLC functions with a gateway. | An externally connected relay (contactor) can be connected via a feedback loop to the Safety Monitor for monitoring purposes. | Inputs Safety, SIL 3, Cat. 4 | Inputs safety, expandable to | Outputs Safety, SIL 3, cat. 4 | Safety outputs, independent according to SIL 3, expandable to | Safety communication | Article No. |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
 | PROFIsafe, PROFINET, ASi-5 / ASi-3 | Gateway with integrated Safety Monitor | IP20 | PROFINET, OPC UA | 2 ASi networks, 2 ASi-5/ASi-3 Masters | yes, max. 4 A/ASi network | Ethernet fieldbus + Ethernet diagnostic | yes | yes | optional | 6 | 3 x 2 channels | max. 62 x 2 channels, max. 1922 in max. configuration | 6 release circuits; 6 x electronic safe outputs | max. 64, max. 1984 in max. configuration | PROFIsafe (F-CPU) + ASIMON program + Safe Link | BWU3674ASi-5/ASi-3 PROFIsafe via PROFINET Gateway with integrated Safety Monitor, 2 ASi-5/ASi-3 masters |
| PROFIsafe, PROFINET, ASi-5 / ASi-3 | Gateway with integrated Safety Monitor | IP20 | PROFINET, OPC UA | 1 ASi network, 1 ASi-5/ASi-3 Master | yes, max. 4 A/ASi network | Ethernet fieldbus + Ethernet diagnostic | yes | yes | optional | 6 | 3 x 2 channels | max. 31 x 2 channels, max. 1891 in max. configuration | 6 release circuits; 6 x electronic safe outputs | max. 64, max. 1984 in max. configuration | PROFIsafe (F-CPU) + ASIMON program + Safe Link | BWU3862ASi-5/ASi-3 PROFIsafe via PROFINET Gateway with integrated Safety Monitor, 1 ASi-5/ASi-3 master |
 | Safety, PROFINET ASi-5/ASi-3 | Gateway with integrated Safety Monitor | IP20 | PROFINET, OPC UA | 1 ASi network, 1 ASi-5/ASi-3 Master | yes, max. 4 A/ASi network | Ethernet fieldbus + Ethernet diagnostic | yes | yes | optional | 6 | 3 x 2 channels | max. 31 x 2 channels, max. 1891 in max. configuration | 6 release circuits; 6 x electronic safe outputs | max. 31, max. 991 in max. configuration | Safe Link | BWU3863ASi-5/ASi-3 PROFINET Gateway with integrated Safety Monitor, 1 ASi-5/ASi-3 master |
 | PROFIsafe, PROFINET | Gateway with integrated Safety Monitor | IP20 | PROFINET, OPC UA | 2 ASi networks, 2 ASi Masters | yes, max. 4 A/ASi network | Ethernet fieldbus + Ethernet diagnostic | yes | yes | optional | 6 | 3 x 2 channels | max. 62 x 2 channels, max. 1922 in max. configuration | 6 release circuits; 6 x electronic safe outputs | max. 64, max. 1984 in max. configuration | PROFIsafe (F-CPU) + ASIMON program + Safe Link | BWU3823ASi-3 PROFIsafe via PROFINET Gateway with integrated Safety Monitor, 2 ASi masters |
 | PROFIsafe, PROFINET | Gateway with integrated Safety Monitor | IP20 | PROFINET | 2 ASi networks, 2 ASi Masters | yes, max. 4 A/ASi network | Ethernet fieldbus + RS 232 | yes | yes | optional | 4 | - | max. 62 x 2 channels | 4 release circuits; 2 x relay, 2 x electronic safe outputs | max. 16 | PROFIsafe (F-CPU) + ASIMON program | BWU2647ASi-3 PROFIsafe via PROFINET Gateway with integrated Safety Monitor, 2 ASi masters |
| PROFIsafe, PROFINET | Gateway with integrated Safety Monitor | IP20 | PROFINET | 1 ASi network, 1 ASi Master | yes, max. 4 A/ASi network | Ethernet fieldbus + Ethernet diagnostic | yes | yes | optional | 6 | 3 x 2 channels | max. 31 x 2 channels | 6 release circuits; 6 x electronic safe outputs | max. 31 | PROFIsafe (F-CPU) + ASIMON program | BWU2794ASi-3 PROFIsafe via PROFINET Gateway with integrated Safety Monitor, 1 ASi master |
 | Safety, PROFINET | Gateway with integrated Safety Monitor | IP20 | PROFINET | 2 ASi networks, 2 ASi Masters | yes, max. 4 A/ASi network | Ethernet fieldbus + Ethernet diagnostic | yes | yes | optional | 6 | 3 x 2 channels | max. 62 x 2 channels, max. 1922 in max. configuration | 6 release circuits; 6 x electronic safe outputs | max. 32, max. 992 in max. configuration | Safe Link | BWU2828ASi-3 PROFINET Gateway with integrated Safety Monitor, 2 ASi masters |
 | Safety, PROFINET | Gateway with integrated Safety Monitor | IP20 | PROFINET | 2 ASi networks, 2 ASi Masters | yes, max. 4 A/ASi network | Ethernet fieldbus + RS 232 | yes | yes | optional | 4 | - | max. 62 x 2 channels, max. 1922 in max. configuration | 4 release circuits; 2 x relay, 2 x electronic safe outputs | max. 32, max. 992 in max. configuration | Safe Link | BWU2642ASi-3 PROFINET Gateway with integrated Safety Monitor, 2 ASi masters |
| Safety, PROFINET | Gateway with integrated Safety Monitor | IP20 | PROFINET | 2 ASi networks, 2 ASi Masters | no, max. 8 A/ASi network, redundant supply | Ethernet fieldbus + Ethernet diagnostic | yes | yes | optional | 6 | 3 x 2 channels | max. 62 x 2 channels, max. 1922 in max. configuration | 6 release circuits; 6 x electronic safe outputs | max. 32, max. 992 in max. configuration | Safe Link | BWU3080ASi-3 PROFINET Gateway with integrated Safety Monitor, 2 ASi masters |
| Safety, PROFINET | Gateway with integrated Safety Monitor | IP20 | PROFINET | 1 ASi network, 1 ASi Master | yes, max. 4 A/ASi network | Ethernet fieldbus + Ethernet diagnostic | yes | yes | optional | 6 | 3 x 2 channels | max. 31 x 2 channels, max. 1891 in max. configuration | 6 release circuits; 6 x electronic safe outputs | max. 31, max. 991 in max. configuration | Safe Link | BWU2798ASi-3 PROFINET Gateway with integrated Safety Monitor, 1 ASi master |
 | Starter Kits | Gateway with integrated Safety Monitor | IP20 | PROFINET | 2 ASi networks, 2 ASi Masters | yes, max. 4 A/ASi network | Ethernet fieldbus + Ethernet diagnostic | yes | yes | optional | 6 | 3 x 2 channels | max. 62 x 2 channels, max. 1922 in max. configuration | 6 release circuits; 6 x electronic safe outputs | max. 32, max. 992 in max. configuration | Safe Link | BW3000Small Starter Kit Safe Link |
 | Starter Kits | Gateway with integrated Safety Monitor | IP20 | PROFINET | 1 ASi network, 1 ASi Master | yes, max. 4 A/ASi network | Ethernet fieldbus + Ethernet diagnostic | yes | yes | optional | 6 | 3 x 2 channels | max. 31 x 2 channels, max. 1891 in max. configuration | 6 release circuits; 6 x electronic safe outputs | max. 31, max. 991 in max. configuration | Safe Link | BW3074Small Starter Kit Safety Gateway in Stainless Steel |
Safety, Sercos
| Figure | Type | Model | "IP20": "IP40": Protected against solid foreign bodies having a diameter of 1.0 mm or larger, protected against access with a wire, no protection against water. "IP54": Protection against dust in damaging amounts, complete protection against contact, protection against splashing water in any angle.
Dust-tight, full protection against contact, protection against temporary immersion. |
Communication interface between fieldbus and gateway: interfaces for standardized fieldbus systems in industrial automation. PROFIBUS ASi gateway: interface for a PROFIBUS fieldbus
PROFIBUS ASi Basic gateway: interface for a PROFIBUS fieldbus PROFIBUS ASi IP65 gateway: interface for a PROFIBUS fieldbus EtherNet/IP+ Modbus TCP ASi gateway: interface for an EtherNet/IP+ ModbusTCP fieldbus BACnet/IP ASi gateway: interface for a BACnet/IP fieldbus Compact-/MicroLogix ASi gateway: interface for the Compact-/MicroLogix backplane POWERLINK ASi gateway: interface for an POWERLINK fieldbus OPC UA server: interface for the OPC UA communication
| Standard devices"Single Master": 1 ASi network, 1 ASi Master. 2 ASi networks, 2 ASi Masters. Safety devices "Single Master" : | " yes, max. 4 A/ASi network ": Operation with short cable lengths with standard 24 V power supply possible.
Should one ASi power supply fail, switching to the other ASi power supply allows all the diagnostics functions to be maintained and the unaffected ASi network continues to operate. 1 ASi power supply per ASi network. | "USB": Access to ASi Master and Safety Monitor with Bihl+Wiedemann proprietary software by using the USB interface. Access to ASi Master and Safety Monitor with Bihl+Wiedemann software by using the Ethernet diagnostic interface or Ethernet fieldbus interface. Access to ASi Master and Safety Monitor with Bihl+Wiedemann software by using the Ethernet diagnostic interface. Access to ASi Master and Safety Monitor with Bihl+Wiedemann software or via Modbus TCP by using the Ethernet diagnostic interface. For a full-fledged Modbus TCP fieldbus interface use one of our Modbus TCP gateways in stainless steel or Modbus TCP gateways with integrated safety monitor. Access to ASi Master and Safety Monitor with Bihl+Wiedemann software by using the Ethernet fieldbus interface or by using an adapter cable via RS 232 interface.
Access to ASi Master and Safety Monitor with Bihl+Wiedemann software by using an adapter cable via RS 232 interface. The latest version of the device description file of the gateway/gateway with integrated safety monitor (GSD, GSDML, EDS, etc.) is available in the "Downloads" section of the respective device. | Detects whether the same address has been assigned to two ASi slaves. Frequent error when using a handheld addressing device. | Checks the ASi line for interference effects such as noise, external voltages, ... | Using a C-program offers the possibility to run mini-PLC functions with a gateway. | An externally connected relay (contactor) can be connected via a feedback loop to the Safety Monitor for monitoring purposes. | Inputs Safety, SIL 3, Cat. 4 | Inputs safety, expandable to | Outputs Safety, SIL 3, cat. 4 | Safety outputs, independent according to SIL 3, expandable to | Safety communication | Article No. |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
 | Safety, Sercos ASi-5/ASi-3 | Gateway with integrated Safety Monitor | IP20 | Sercos, OPC UA | 2 ASi networks, 2 ASi-5/ASi-3 Masters | yes, max. 4 A/ASi network | Ethernet diagnostic | yes | yes | optional | 6 | 3 x 2 channels | max. 62 x 2 channels, max. 1922 in max. configuration | 6 release circuits; 6 x electronic safe outputs | max. 64, max. 1984 in max. configuration | safe Schneider drives over Sercos + Safe Link | BWU3861ASi-5/ASi-3 safe Schneider drives over Sercos Gateway with integrated Safety Monitor, 2 ASi-5/ASi-3 masters |
 | Safety, Sercos ASi-5/ASi-3 | Gateway with integrated Safety Monitor | IP20 | Sercos, OPC UA | 2 ASi networks, 2 ASi-5/ASi-3 Masters | yes, max. 4 A/ASi network | Ethernet diagnostic | yes | yes | optional | 6 | 3 x 2 channels | max. 62 x 2 channels, max. 1922 in max. configuration | 6 release circuits; 6 x electronic safe outputs | max. 64, max. 1984 in max. configuration | CIP Safety over Sercos + Safe Link | BWU3860ASi-5/ASi-3 CIP Safety over Sercos Gateway with integrated Safety Monitor, 2 ASi-5/ASi-3 masters |
 | Safety, Sercos ASi-5/ASi-3 | Gateway with integrated Safety Monitor | IP20 | Sercos, OPC UA | 2 ASi networks, 2 ASi-5/ASi-3 Masters | yes, max. 4 A/ASi network | Ethernet diagnostic | yes | yes | optional | - | - | max. 62 x 2 channels, max. 1922 in max. configuration | - | max. 64, max. 1984 in max. configuration | CIP Safety over Sercos + Safe Link | BWU3845ASi-5/ASi-3 CIP Safety over Sercos Gateway with integrated Safety Monitor, 2 ASi-5/ASi-3 masters |
 | Safety, Sercos | Gateway with integrated Safety Monitor | IP20 | Sercos | 2 ASi networks, 2 ASi Masters | yes, max. 4 A/ASi network | Ethernet diagnostic | yes | yes | optional | 6 | 3 x 2 channels | max. 62 x 2 channels, max. 1922 in max. configuration | 6 release circuits; 6 x electronic safe outputs | max. 64, max. 1984 in max. configuration | CIP Safety over Sercos + Safe Link | BWU3160ASi-3 CIP Safety over Sercos Gateway with integrated Safety Monitor, 2 ASi masters |
| Safety, Sercos | Gateway with integrated Safety Monitor | IP20 | Sercos | 2 ASi networks, 1 ASi Master | yes, max. 4 A/ASi network | Ethernet diagnostic | yes | yes | optional | 6 | 3 x 2 channels | max. 62 x 2 channels, max. 1922 in max. configuration | 6 release circuits; 6 x electronic safe outputs | max. 64, max. 1984 in max. configuration | safe Schneider drives over Sercos + Safe Link | BWU2984ASi-3 safe Schneider drives over Sercos Gateway with integrated Safety Monitor, 2 ASi masters |
 | Safety, Sercos | Gateway with integrated Safety Monitor | IP20 | Sercos | 2 ASi networks, 1 ASi Master | yes, max. 4 A/ASi network | Ethernet diagnostic | yes | yes | optional | 4 | - | max. 62 x 2 channels, max. 1922 in max. configuration | 4 release circuits; 2 x relay, 2 x electronic safe outputs | max. 32, max. 992 in max. configuration | Safe Link | BWU2588ASi-3 Sercos Gateway with integrated Safety Monitor, 1 ASi master |
Safety, EtherNet/IP + ModbusTCP
| Figure | Type | Model | "IP20": "IP40": Protected against solid foreign bodies having a diameter of 1.0 mm or larger, protected against access with a wire, no protection against water. "IP54": Protection against dust in damaging amounts, complete protection against contact, protection against splashing water in any angle.
Dust-tight, full protection against contact, protection against temporary immersion. |
Communication interface between fieldbus and gateway: interfaces for standardized fieldbus systems in industrial automation. PROFIBUS ASi gateway: interface for a PROFIBUS fieldbus
PROFIBUS ASi Basic gateway: interface for a PROFIBUS fieldbus PROFIBUS ASi IP65 gateway: interface for a PROFIBUS fieldbus EtherNet/IP+ Modbus TCP ASi gateway: interface for an EtherNet/IP+ ModbusTCP fieldbus BACnet/IP ASi gateway: interface for a BACnet/IP fieldbus Compact-/MicroLogix ASi gateway: interface for the Compact-/MicroLogix backplane POWERLINK ASi gateway: interface for an POWERLINK fieldbus OPC UA server: interface for the OPC UA communication
| Standard devices"Single Master": 1 ASi network, 1 ASi Master. 2 ASi networks, 2 ASi Masters. Safety devices "Single Master" : | " yes, max. 4 A/ASi network ": Operation with short cable lengths with standard 24 V power supply possible.
Should one ASi power supply fail, switching to the other ASi power supply allows all the diagnostics functions to be maintained and the unaffected ASi network continues to operate. 1 ASi power supply per ASi network. | "USB": Access to ASi Master and Safety Monitor with Bihl+Wiedemann proprietary software by using the USB interface. Access to ASi Master and Safety Monitor with Bihl+Wiedemann software by using the Ethernet diagnostic interface or Ethernet fieldbus interface. Access to ASi Master and Safety Monitor with Bihl+Wiedemann software by using the Ethernet diagnostic interface. Access to ASi Master and Safety Monitor with Bihl+Wiedemann software or via Modbus TCP by using the Ethernet diagnostic interface. For a full-fledged Modbus TCP fieldbus interface use one of our Modbus TCP gateways in stainless steel or Modbus TCP gateways with integrated safety monitor. Access to ASi Master and Safety Monitor with Bihl+Wiedemann software by using the Ethernet fieldbus interface or by using an adapter cable via RS 232 interface.
Access to ASi Master and Safety Monitor with Bihl+Wiedemann software by using an adapter cable via RS 232 interface. The latest version of the device description file of the gateway/gateway with integrated safety monitor (GSD, GSDML, EDS, etc.) is available in the "Downloads" section of the respective device. | Detects whether the same address has been assigned to two ASi slaves. Frequent error when using a handheld addressing device. | Checks the ASi line for interference effects such as noise, external voltages, ... | Using a C-program offers the possibility to run mini-PLC functions with a gateway. | An externally connected relay (contactor) can be connected via a feedback loop to the Safety Monitor for monitoring purposes. | Inputs Safety, SIL 3, Cat. 4 | Inputs safety, expandable to | Outputs Safety, SIL 3, cat. 4 | Safety outputs, independent according to SIL 3, expandable to | Safety communication | Article No. |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
 | Safety, EtherNet/IP + Modbus TCP, ASi-5 / ASi-3 | Gateway with integrated Safety Monitor | IP20 | EtherNet/IP + ModbusTCP, OPC UA | 2 ASi networks, 2 ASi-5/ASi-3 Masters | yes, max. 4 A/ASi network | Ethernet fieldbus + Ethernet diagnostic | yes | yes | optional | 6 | 3 x 2 channels | max. 62 x 2 channels, max. 1922 in max. configuration | 6 release circuits; 6 x electronic safe outputs | max. 64, max. 1984 in max. configuration | CIP Safety over EtherNet/IP + Safe Link | BWU3857ASi-5/ASi-3 CIP Safety over EtherNet/IP + ModbusTCP Gateway with integrated Safety Monitor, 2 ASi-5/ASi-3 masters |
 | Safety, EtherNet/IP + ModbusTCP | Gateway with integrated Safety Monitor | IP20 | EtherNet/IP + ModbusTCP, OPC UA | 2 ASi networks, 2 ASi Masters | yes, max. 4 A/ASi network | Ethernet fieldbus + Ethernet diagnostic | yes | yes | optional | 6 | 3 x 2 channels | max. 62 x 2 channels, max. 1922 in max. configuration | 6 release circuits; 6 x electronic safe outputs | max. 64, max. 1984 in max. configuration | CIP Safety over EtherNet/IP + Safe Link | BWU3683ASi-3 CIP Safety over EtherNet/IP + ModbusTCP Gateway with integrated Safety Monitor, 2 ASi masters |
| Safety, EtherNet/IP + ModbusTCP | Gateway with integrated Safety Monitor | IP20 | EtherNet/IP + ModbusTCP | 2 ASi networks, 2 ASi Masters | yes, max. 4 A/ASi network | Ethernet fieldbus + Ethernet diagnostic | yes | yes | optional | 6 | 3 x 2 channels | max. 62 x 2 channels | 6 release circuits; 6 x electronic safe outputs | max. 64 | CIP Safety over EtherNet/IP | BWU2742ASi-3 CIP Safety over EtherNet/IP + ModbusTCP Gateway with integrated Safety Monitor, 2 ASi masters |
 | Safety, EtherNet/IP + ModbusTCP | Gateway with integrated Safety Monitor | IP20 | EtherNet/IP + ModbusTCP, OPC UA | 2 ASi networks, 2 ASi Masters | yes, max. 4 A/ASi network | Ethernet fieldbus + Ethernet diagnostic | yes | yes | optional | 6 | 3 x 2 channels | max. 62 x 2 channels, max. 1922 in max. configuration | 6 release circuits; 6 x electronic safe outputs | max. 32, max. 992 in max. configuration | Safe Link | BWU3693ASi-3 EtherNet/IP + ModbusTCP Gateway with integrated Safety Monitor, 2 ASi masters |
 | Safety, EtherNet/IP + ModbusTCP | Gateway with integrated Safety Monitor | IP20 | EtherNet/IP + ModbusTCP | 2 ASi networks, 2 ASi Masters | yes, max. 4 A/ASi network | Ethernet fieldbus + Ethernet diagnostic | yes | yes | optional | 6 | 3 x 2 channels | max. 62 x 2 channels, max. 1922 in max. configuration | 6 release circuits; 6 x electronic safe outputs | max. 32, max. 992 in max. configuration | Safe Link | BWU3543ASi-3 EtherNet/IP + ModbusTCP Gateway with integrated Safety Monitor, 2 ASi masters |
| Safety, EtherNet/IP + ModbusTCP | Gateway with integrated Safety Monitor | IP20 | EtherNet/IP + ModbusTCP | 2 ASi networks, 2 ASi Masters | no, max. 8 A/ASi network, redundant supply | Ethernet fieldbus + Ethernet diagnostic | yes | yes | optional | 6 | 3 x 2 channels | max. 62 x 2 channels, max. 1922 in max. configuration | 6 release circuits; 6 x electronic safe outputs | max. 32, max. 992 in max. configuration | Safe Link | BWU3544ASi-3 EtherNet/IP + ModbusTCP Gateway with integrated Safety Monitor, 2 ASi masters |
| Safety, EtherNet/IP + ModbusTCP | Gateway with integrated Safety Monitor | IP20 | EtherNet/IP + ModbusTCP | 2 ASi networks, 2 ASi Masters | yes, max. 4 A/ASi network | Ethernet fieldbus + Ethernet diagnostic | yes | yes | optional | 4 | - | max. 62 x 2 channels, max. 1922 in max. configuration | 4 release circuits; 2 x relay, 2 x electronic safe outputs | max. 32, max. 992 in max. configuration | Safe Link | BWU2579ASi-3 EtherNet/IP + ModbusTCP Gateway with integrated Safety Monitor, 2 ASi masters |
| Safety, EtherNet/IP + ModbusTCP | Gateway with integrated Safety Monitor | IP20 | EtherNet/IP + ModbusTCP | 1 ASi network, 1 ASi Master | yes, max. 4 A/ASi network | Ethernet fieldbus + Ethernet diagnostic | yes | yes | optional | 6 | 3 x 2 channels | max. 31 x 2 channels, max. 1891 in max. configuration | 6 release circuits; 6 x electronic safe outputs | max. 31, max. 991 in max. configuration | Safe Link | BWU3542ASi-3 EtherNet/IP + ModbusTCP Gateway with integrated Safety Monitor, 1 ASi masters |
Safety, DeviceNet
| Figure | Type | Model | "IP20": "IP40": Protected against solid foreign bodies having a diameter of 1.0 mm or larger, protected against access with a wire, no protection against water. "IP54": Protection against dust in damaging amounts, complete protection against contact, protection against splashing water in any angle.
Dust-tight, full protection against contact, protection against temporary immersion. |
Communication interface between fieldbus and gateway: interfaces for standardized fieldbus systems in industrial automation. PROFIBUS ASi gateway: interface for a PROFIBUS fieldbus
PROFIBUS ASi Basic gateway: interface for a PROFIBUS fieldbus PROFIBUS ASi IP65 gateway: interface for a PROFIBUS fieldbus EtherNet/IP+ Modbus TCP ASi gateway: interface for an EtherNet/IP+ ModbusTCP fieldbus BACnet/IP ASi gateway: interface for a BACnet/IP fieldbus Compact-/MicroLogix ASi gateway: interface for the Compact-/MicroLogix backplane POWERLINK ASi gateway: interface for an POWERLINK fieldbus OPC UA server: interface for the OPC UA communication
| Standard devices"Single Master": 1 ASi network, 1 ASi Master. 2 ASi networks, 2 ASi Masters. Safety devices "Single Master" : | " yes, max. 4 A/ASi network ": Operation with short cable lengths with standard 24 V power supply possible.
Should one ASi power supply fail, switching to the other ASi power supply allows all the diagnostics functions to be maintained and the unaffected ASi network continues to operate. 1 ASi power supply per ASi network. | "USB": Access to ASi Master and Safety Monitor with Bihl+Wiedemann proprietary software by using the USB interface. Access to ASi Master and Safety Monitor with Bihl+Wiedemann software by using the Ethernet diagnostic interface or Ethernet fieldbus interface. Access to ASi Master and Safety Monitor with Bihl+Wiedemann software by using the Ethernet diagnostic interface. Access to ASi Master and Safety Monitor with Bihl+Wiedemann software or via Modbus TCP by using the Ethernet diagnostic interface. For a full-fledged Modbus TCP fieldbus interface use one of our Modbus TCP gateways in stainless steel or Modbus TCP gateways with integrated safety monitor. Access to ASi Master and Safety Monitor with Bihl+Wiedemann software by using the Ethernet fieldbus interface or by using an adapter cable via RS 232 interface.
Access to ASi Master and Safety Monitor with Bihl+Wiedemann software by using an adapter cable via RS 232 interface. The latest version of the device description file of the gateway/gateway with integrated safety monitor (GSD, GSDML, EDS, etc.) is available in the "Downloads" section of the respective device. | Detects whether the same address has been assigned to two ASi slaves. Frequent error when using a handheld addressing device. | Checks the ASi line for interference effects such as noise, external voltages, ... | Using a C-program offers the possibility to run mini-PLC functions with a gateway. | An externally connected relay (contactor) can be connected via a feedback loop to the Safety Monitor for monitoring purposes. | Inputs Safety, SIL 3, Cat. 4 | Inputs safety, expandable to | Outputs Safety, SIL 3, cat. 4 | Safety outputs, independent according to SIL 3, expandable to | Safety communication | Article No. |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
 | Safety, DeviceNet | Gateway with integrated Safety Monitor | IP20 | DeviceNet | 1 ASi network, 1 ASi Master | yes, max. 4 A/ASi network | Ethernet diagnostic | yes | yes | optional | 6 | 3 x 2 channels | max. 31 x 2 channels, max. 1891 in max. configuration | 6 release circuits; 6 x electronic safe outputs | max. 31, max. 991 in max. configuration | Safe Link | BWU2972ASi-3 DeviceNet Gateway with integrated Safety Monitor, 1 ASi master |
Safety, EtherCAT
| Figure | Type | Model | "IP20": "IP40": Protected against solid foreign bodies having a diameter of 1.0 mm or larger, protected against access with a wire, no protection against water. "IP54": Protection against dust in damaging amounts, complete protection against contact, protection against splashing water in any angle.
Dust-tight, full protection against contact, protection against temporary immersion. |
Communication interface between fieldbus and gateway: interfaces for standardized fieldbus systems in industrial automation. PROFIBUS ASi gateway: interface for a PROFIBUS fieldbus
PROFIBUS ASi Basic gateway: interface for a PROFIBUS fieldbus PROFIBUS ASi IP65 gateway: interface for a PROFIBUS fieldbus EtherNet/IP+ Modbus TCP ASi gateway: interface for an EtherNet/IP+ ModbusTCP fieldbus BACnet/IP ASi gateway: interface for a BACnet/IP fieldbus Compact-/MicroLogix ASi gateway: interface for the Compact-/MicroLogix backplane POWERLINK ASi gateway: interface for an POWERLINK fieldbus OPC UA server: interface for the OPC UA communication
| Standard devices"Single Master": 1 ASi network, 1 ASi Master. 2 ASi networks, 2 ASi Masters. Safety devices "Single Master" : | " yes, max. 4 A/ASi network ": Operation with short cable lengths with standard 24 V power supply possible.
Should one ASi power supply fail, switching to the other ASi power supply allows all the diagnostics functions to be maintained and the unaffected ASi network continues to operate. 1 ASi power supply per ASi network. | "USB": Access to ASi Master and Safety Monitor with Bihl+Wiedemann proprietary software by using the USB interface. Access to ASi Master and Safety Monitor with Bihl+Wiedemann software by using the Ethernet diagnostic interface or Ethernet fieldbus interface. Access to ASi Master and Safety Monitor with Bihl+Wiedemann software by using the Ethernet diagnostic interface. Access to ASi Master and Safety Monitor with Bihl+Wiedemann software or via Modbus TCP by using the Ethernet diagnostic interface. For a full-fledged Modbus TCP fieldbus interface use one of our Modbus TCP gateways in stainless steel or Modbus TCP gateways with integrated safety monitor. Access to ASi Master and Safety Monitor with Bihl+Wiedemann software by using the Ethernet fieldbus interface or by using an adapter cable via RS 232 interface.
Access to ASi Master and Safety Monitor with Bihl+Wiedemann software by using an adapter cable via RS 232 interface. The latest version of the device description file of the gateway/gateway with integrated safety monitor (GSD, GSDML, EDS, etc.) is available in the "Downloads" section of the respective device. | Detects whether the same address has been assigned to two ASi slaves. Frequent error when using a handheld addressing device. | Checks the ASi line for interference effects such as noise, external voltages, ... | Using a C-program offers the possibility to run mini-PLC functions with a gateway. | An externally connected relay (contactor) can be connected via a feedback loop to the Safety Monitor for monitoring purposes. | Inputs Safety, SIL 3, Cat. 4 | Inputs safety, expandable to | Outputs Safety, SIL 3, cat. 4 | Safety outputs, independent according to SIL 3, expandable to | Safety communication | Article No. |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Safety, EtherCAT ASi-5/ASi-3 | Gateway with integrated Safety Monitor | IP20 | EtherCAT, OPC UA | 2 ASi networks, 2 ASi-5/ASi-3 Masters | yes, max. 4 A/ASi network | Ethernet diagnostic | yes | yes | optional | 6 | 3 x 2 channels | max. 62 x 2 channels, max. 1922 in max. configuration | 6 release circuits; 6 x electronic safe outputs | max. 64, max. 1984 in max. configuration | FSoE + Safe Link | BWU3858ASi-5/ASi-3 Safety over EtherCAT Gateway with integrated Safety Monitor, 2 ASi-5/ASi-3 masters |
 | Safety, EtherCAT | Gateway with integrated Safety Monitor | IP20 | EtherCAT | 2 ASi networks, 2 ASi Masters | yes, max. 4 A/ASi network | Ethernet diagnostic | yes | yes | optional | 6 | 3 x 2 channels | max. 62 x 2 channels, max. 1922 in max. configuration | 6 release circuits; 6 x electronic safe outputs | max. 64, max. 1984 in max. configuration | FSoE + Safe Link | BWU3418ASi-3 Safety over EtherCAT Gateway with integrated Safety Monitor, 2 ASi masters |
 | Safety, EtherCAT | Gateway with integrated Safety Monitor | IP20 | EtherCAT | 2 ASi networks, 2 ASi Masters | yes, max. 4 A/ASi network | Ethernet diagnostic | yes | yes | optional | 6 | 3 x 2 channels | max. 62 x 2 channels, max. 1922 in max. configuration | 6 release circuits; 6 x electronic safe outputs | max. 32, max. 992 in max. configuration | Safe Link | BWU2944ASi-3 EtherCAT Gateway with integrated Safety Monitor, 2 ASi masters |
| Safety, EtherCAT | Gateway with integrated Safety Monitor | IP20 | EtherCAT | 1 ASi network, 1 ASi Master | yes, max. 4 A/ASi network | Ethernet diagnostic | yes | yes | optional | 6 | 3 x 2 channels | max. 31 x 2 channels, max. 1891 in max. configuration | 6 release circuits; 6 x electronic safe outputs | max. 32, max. 992 in max. configuration | FSoE + Safe Link | BWU3509ASi-3 Safety over EtherCAT Gateway with integrated Safety Monitor, 1 ASi master |
| Safety, EtherCAT | Gateway with integrated Safety Monitor | IP20 | EtherCAT | 1 ASi network, 1 ASi Master | yes, max. 4 A/ASi network | Ethernet diagnostic | yes | yes | optional | 6 | 3 x 2 channels | max. 31 x 2 channels, max. 1891 in max. configuration | 6 release circuits; 6 x electronic safe outputs | max. 31, max. 991 in max. configuration | Safe Link | BWU2797ASi-3 EtherCAT Gateway with integrated Safety Monitor, 1 ASi master |
Safety, POWERLINK
| Figure | Type | Model | "IP20": "IP40": Protected against solid foreign bodies having a diameter of 1.0 mm or larger, protected against access with a wire, no protection against water. "IP54": Protection against dust in damaging amounts, complete protection against contact, protection against splashing water in any angle.
Dust-tight, full protection against contact, protection against temporary immersion. | Inputs Safety, SIL 3, Cat. 4 | An externally connected relay (contactor) can be connected via a feedback loop to the Safety Monitor for monitoring purposes. | Inputs safety, expandable to | Outputs Safety, SIL 3, cat. 4 | Safety outputs, independent according to SIL 3, expandable to | Safety communication |
Communication interface between fieldbus and gateway: interfaces for standardized fieldbus systems in industrial automation. PROFIBUS ASi gateway: interface for a PROFIBUS fieldbus
PROFIBUS ASi Basic gateway: interface for a PROFIBUS fieldbus PROFIBUS ASi IP65 gateway: interface for a PROFIBUS fieldbus EtherNet/IP+ Modbus TCP ASi gateway: interface for an EtherNet/IP+ ModbusTCP fieldbus BACnet/IP ASi gateway: interface for a BACnet/IP fieldbus Compact-/MicroLogix ASi gateway: interface for the Compact-/MicroLogix backplane POWERLINK ASi gateway: interface for an POWERLINK fieldbus OPC UA server: interface for the OPC UA communication
| Standard devices"Single Master": 1 ASi network, 1 ASi Master. 2 ASi networks, 2 ASi Masters. Safety devices "Single Master" : | " yes, max. 4 A/ASi network ": Operation with short cable lengths with standard 24 V power supply possible.
Should one ASi power supply fail, switching to the other ASi power supply allows all the diagnostics functions to be maintained and the unaffected ASi network continues to operate. 1 ASi power supply per ASi network. | "USB": Access to ASi Master and Safety Monitor with Bihl+Wiedemann proprietary software by using the USB interface. Access to ASi Master and Safety Monitor with Bihl+Wiedemann software by using the Ethernet diagnostic interface or Ethernet fieldbus interface. Access to ASi Master and Safety Monitor with Bihl+Wiedemann software by using the Ethernet diagnostic interface. Access to ASi Master and Safety Monitor with Bihl+Wiedemann software or via Modbus TCP by using the Ethernet diagnostic interface. For a full-fledged Modbus TCP fieldbus interface use one of our Modbus TCP gateways in stainless steel or Modbus TCP gateways with integrated safety monitor. Access to ASi Master and Safety Monitor with Bihl+Wiedemann software by using the Ethernet fieldbus interface or by using an adapter cable via RS 232 interface.
Access to ASi Master and Safety Monitor with Bihl+Wiedemann software by using an adapter cable via RS 232 interface. The latest version of the device description file of the gateway/gateway with integrated safety monitor (GSD, GSDML, EDS, etc.) is available in the "Downloads" section of the respective device. | Detects whether the same address has been assigned to two ASi slaves. Frequent error when using a handheld addressing device. | Checks the ASi line for interference effects such as noise, external voltages, ... | Using a C-program offers the possibility to run mini-PLC functions with a gateway. | Article No. |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
 | Safety, POWERLINK | Gateway with integrated Safety Monitor | IP20 | 3 x 2 channels | 6 | max. 62 x 2 channels, max. 1922 in max. configuration | 6 release circuits; 6 x electronic safe outputs | max. 32, max. 992 in max. configuration | Safe Link | POWERLINK | 2 ASi networks, 2 ASi Masters | yes, max. 4 A/ASi network | Ethernet diagnostic | yes | yes | optional | BWU3176ASi-3 POWERLINK Gateway with integrated Safety Monitor, 2 ASi masters |
| Safety, POWERLINK | Gateway with integrated Safety Monitor | IP20 | 3 x 2 channels | 6 | max. 31 x 2 channels, max. 1891 in max. configuration | 6 release circuits; 6 x electronic safe outputs | max. 31, max. 991 in max. configuration | Safe Link | POWERLINK | 1 ASi network, 1 ASi Master | yes, max. 4 A/ASi network | Ethernet diagnostic | yes | yes | optional | BWU3177ASi-3 POWERLINK Gateway with integrated Safety Monitor, 1 ASi master |
Safety, CANopen
| Figure | Type | Model | "IP20": "IP40": Protected against solid foreign bodies having a diameter of 1.0 mm or larger, protected against access with a wire, no protection against water. "IP54": Protection against dust in damaging amounts, complete protection against contact, protection against splashing water in any angle.
Dust-tight, full protection against contact, protection against temporary immersion. |
Communication interface between fieldbus and gateway: interfaces for standardized fieldbus systems in industrial automation. PROFIBUS ASi gateway: interface for a PROFIBUS fieldbus
PROFIBUS ASi Basic gateway: interface for a PROFIBUS fieldbus PROFIBUS ASi IP65 gateway: interface for a PROFIBUS fieldbus EtherNet/IP+ Modbus TCP ASi gateway: interface for an EtherNet/IP+ ModbusTCP fieldbus BACnet/IP ASi gateway: interface for a BACnet/IP fieldbus Compact-/MicroLogix ASi gateway: interface for the Compact-/MicroLogix backplane POWERLINK ASi gateway: interface for an POWERLINK fieldbus OPC UA server: interface for the OPC UA communication
| Standard devices"Single Master": 1 ASi network, 1 ASi Master. 2 ASi networks, 2 ASi Masters. Safety devices "Single Master" : | " yes, max. 4 A/ASi network ": Operation with short cable lengths with standard 24 V power supply possible.
Should one ASi power supply fail, switching to the other ASi power supply allows all the diagnostics functions to be maintained and the unaffected ASi network continues to operate. 1 ASi power supply per ASi network. | "USB": Access to ASi Master and Safety Monitor with Bihl+Wiedemann proprietary software by using the USB interface. Access to ASi Master and Safety Monitor with Bihl+Wiedemann software by using the Ethernet diagnostic interface or Ethernet fieldbus interface. Access to ASi Master and Safety Monitor with Bihl+Wiedemann software by using the Ethernet diagnostic interface. Access to ASi Master and Safety Monitor with Bihl+Wiedemann software or via Modbus TCP by using the Ethernet diagnostic interface. For a full-fledged Modbus TCP fieldbus interface use one of our Modbus TCP gateways in stainless steel or Modbus TCP gateways with integrated safety monitor. Access to ASi Master and Safety Monitor with Bihl+Wiedemann software by using the Ethernet fieldbus interface or by using an adapter cable via RS 232 interface.
Access to ASi Master and Safety Monitor with Bihl+Wiedemann software by using an adapter cable via RS 232 interface. The latest version of the device description file of the gateway/gateway with integrated safety monitor (GSD, GSDML, EDS, etc.) is available in the "Downloads" section of the respective device. | Detects whether the same address has been assigned to two ASi slaves. Frequent error when using a handheld addressing device. | Checks the ASi line for interference effects such as noise, external voltages, ... | Using a C-program offers the possibility to run mini-PLC functions with a gateway. | An externally connected relay (contactor) can be connected via a feedback loop to the Safety Monitor for monitoring purposes. | Inputs Safety, SIL 3, Cat. 4 | Inputs safety, expandable to | Outputs Safety, SIL 3, cat. 4 | Safety outputs, independent according to SIL 3, expandable to | Safety communication | Article No. |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
 | Safety, CANopen | Gateway with integrated Safety Monitor | IP20 | CANopen | 1 ASi network, 1 ASi Master | yes, max. 4 A/ASi network | Ethernet diagnostic | yes | yes | optional | 6 | 3 x 2 channels | max. 31 x 2 channels, max. 1891 in max. configuration | 6 release circuits; 6 x electronic safe outputs | max. 31, max. 991 in max. configuration | Safe Link | BWU2804ASi-3 CANopen Gateway with integrated Safety Monitor, 1 ASi master |
Safety, CC-Link
| Figure | Type | Model | "IP20": "IP40": Protected against solid foreign bodies having a diameter of 1.0 mm or larger, protected against access with a wire, no protection against water. "IP54": Protection against dust in damaging amounts, complete protection against contact, protection against splashing water in any angle.
Dust-tight, full protection against contact, protection against temporary immersion. |
Communication interface between fieldbus and gateway: interfaces for standardized fieldbus systems in industrial automation. PROFIBUS ASi gateway: interface for a PROFIBUS fieldbus
PROFIBUS ASi Basic gateway: interface for a PROFIBUS fieldbus PROFIBUS ASi IP65 gateway: interface for a PROFIBUS fieldbus EtherNet/IP+ Modbus TCP ASi gateway: interface for an EtherNet/IP+ ModbusTCP fieldbus BACnet/IP ASi gateway: interface for a BACnet/IP fieldbus Compact-/MicroLogix ASi gateway: interface for the Compact-/MicroLogix backplane POWERLINK ASi gateway: interface for an POWERLINK fieldbus OPC UA server: interface for the OPC UA communication
| Standard devices"Single Master": 1 ASi network, 1 ASi Master. 2 ASi networks, 2 ASi Masters. Safety devices "Single Master" : | " yes, max. 4 A/ASi network ": Operation with short cable lengths with standard 24 V power supply possible.
Should one ASi power supply fail, switching to the other ASi power supply allows all the diagnostics functions to be maintained and the unaffected ASi network continues to operate. 1 ASi power supply per ASi network. | "USB": Access to ASi Master and Safety Monitor with Bihl+Wiedemann proprietary software by using the USB interface. Access to ASi Master and Safety Monitor with Bihl+Wiedemann software by using the Ethernet diagnostic interface or Ethernet fieldbus interface. Access to ASi Master and Safety Monitor with Bihl+Wiedemann software by using the Ethernet diagnostic interface. Access to ASi Master and Safety Monitor with Bihl+Wiedemann software or via Modbus TCP by using the Ethernet diagnostic interface. For a full-fledged Modbus TCP fieldbus interface use one of our Modbus TCP gateways in stainless steel or Modbus TCP gateways with integrated safety monitor. Access to ASi Master and Safety Monitor with Bihl+Wiedemann software by using the Ethernet fieldbus interface or by using an adapter cable via RS 232 interface.
Access to ASi Master and Safety Monitor with Bihl+Wiedemann software by using an adapter cable via RS 232 interface. The latest version of the device description file of the gateway/gateway with integrated safety monitor (GSD, GSDML, EDS, etc.) is available in the "Downloads" section of the respective device. | Detects whether the same address has been assigned to two ASi slaves. Frequent error when using a handheld addressing device. | Checks the ASi line for interference effects such as noise, external voltages, ... | Using a C-program offers the possibility to run mini-PLC functions with a gateway. | An externally connected relay (contactor) can be connected via a feedback loop to the Safety Monitor for monitoring purposes. | Inputs Safety, SIL 3, Cat. 4 | Inputs safety, expandable to | Outputs Safety, SIL 3, cat. 4 | Safety outputs, independent according to SIL 3, expandable to | Safety communication | Article No. |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
 | Safety, CC-Link | Gateway with integrated Safety Monitor | IP20 | CC-Link | 1 ASi network, 1 ASi Master | yes, max. 4 A/ASi network | Ethernet diagnostic | yes | yes | optional | 6 | 3 x 2 channels | max. 31 x 2 channels, max. 1891 in max. configuration | 6 release circuits; 6 x electronic safe outputs | max. 31, max. 991 in max. configuration | Safe Link | BWU2833ASi-3 CC-Link Gateway with integrated Safety Monitor, 1 ASi master |
Starter Kits
- Fully assembled and wired in a practical case
| Figure | Type | Model | "IP20": "IP40": Protected against solid foreign bodies having a diameter of 1.0 mm or larger, protected against access with a wire, no protection against water. "IP54": Protection against dust in damaging amounts, complete protection against contact, protection against splashing water in any angle.
Dust-tight, full protection against contact, protection against temporary immersion. |
Communication interface between fieldbus and gateway: interfaces for standardized fieldbus systems in industrial automation. PROFIBUS ASi gateway: interface for a PROFIBUS fieldbus
PROFIBUS ASi Basic gateway: interface for a PROFIBUS fieldbus PROFIBUS ASi IP65 gateway: interface for a PROFIBUS fieldbus EtherNet/IP+ Modbus TCP ASi gateway: interface for an EtherNet/IP+ ModbusTCP fieldbus BACnet/IP ASi gateway: interface for a BACnet/IP fieldbus Compact-/MicroLogix ASi gateway: interface for the Compact-/MicroLogix backplane POWERLINK ASi gateway: interface for an POWERLINK fieldbus OPC UA server: interface for the OPC UA communication
| Standard devices"Single Master": 1 ASi network, 1 ASi Master. 2 ASi networks, 2 ASi Masters. Safety devices "Single Master" : | " yes, max. 4 A/ASi network ": Operation with short cable lengths with standard 24 V power supply possible.
Should one ASi power supply fail, switching to the other ASi power supply allows all the diagnostics functions to be maintained and the unaffected ASi network continues to operate. 1 ASi power supply per ASi network. | "USB": Access to ASi Master and Safety Monitor with Bihl+Wiedemann proprietary software by using the USB interface. Access to ASi Master and Safety Monitor with Bihl+Wiedemann software by using the Ethernet diagnostic interface or Ethernet fieldbus interface. Access to ASi Master and Safety Monitor with Bihl+Wiedemann software by using the Ethernet diagnostic interface. Access to ASi Master and Safety Monitor with Bihl+Wiedemann software or via Modbus TCP by using the Ethernet diagnostic interface. For a full-fledged Modbus TCP fieldbus interface use one of our Modbus TCP gateways in stainless steel or Modbus TCP gateways with integrated safety monitor. Access to ASi Master and Safety Monitor with Bihl+Wiedemann software by using the Ethernet fieldbus interface or by using an adapter cable via RS 232 interface.
Access to ASi Master and Safety Monitor with Bihl+Wiedemann software by using an adapter cable via RS 232 interface. The latest version of the device description file of the gateway/gateway with integrated safety monitor (GSD, GSDML, EDS, etc.) is available in the "Downloads" section of the respective device. | Detects whether the same address has been assigned to two ASi slaves. Frequent error when using a handheld addressing device. | Checks the ASi line for interference effects such as noise, external voltages, ... | Using a C-program offers the possibility to run mini-PLC functions with a gateway. | An externally connected relay (contactor) can be connected via a feedback loop to the Safety Monitor for monitoring purposes. | Inputs Safety, SIL 3, Cat. 4 | Inputs safety, expandable to | Outputs Safety, SIL 3, cat. 4 | Safety outputs, independent according to SIL 3, expandable to | Safety communication | Article No. |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Starter Kits | Gateway | IP20 | PROFIBUS | 2 ASi networks, 2 ASi Masters | yes, max. 4 A/ASi network | Ethernet diagnostic | yes | yes | optional | - | - | - | - | - | - | BW2726Gateway with programming in C Starter Kit |
| Starter Kits | Gateway | IP20 | PROFINET, OPC UA | 1 ASi network, 1 ASi-5/ASi-3 Master | yes, max. 4 A/ASi network | Ethernet fieldbus | yes | yes | - | - | - | - | - | - | - | BW4211Small Starter Kit ASi-5/IO-Link |
| Starter Kits | Gateway with integrated Safety Monitor | IP20 | PROFIBUS | 2 ASi networks, 2 ASi Masters | yes, max. 4 A/ASi network | Ethernet diagnostic | yes | yes | optional | 4 | - | max. 62 x 2 channels, max. 1922 in max. configuration | 4 release circuits; 2 x relay, 2 x electronic safe outputs | max. 32, max. 992 in max. configuration | Safe Link | BW2695Safety Gateways in Stainless Steel Starter Kit |
| Starter Kits | Gateway with integrated Safety Monitor | IP20 | PROFINET | 2 ASi networks, 2 ASi Masters | yes, max. 4 A/ASi network | Ethernet fieldbus + Ethernet diagnostic | yes | yes | optional | 6 | 3 x 2 channels | max. 62 x 2 channels, max. 1922 in max. configuration | 6 release circuits; 6 x electronic safe outputs | max. 32, max. 992 in max. configuration | Safe Link | BW3000Small Starter Kit Safe Link |
| Starter Kits | Gateway with integrated Safety Monitor | IP20 | PROFINET | 1 ASi network, 1 ASi Master | yes, max. 4 A/ASi network | Ethernet fieldbus + Ethernet diagnostic | yes | yes | optional | 6 | 3 x 2 channels | max. 31 x 2 channels, max. 1891 in max. configuration | 6 release circuits; 6 x electronic safe outputs | max. 31, max. 991 in max. configuration | Safe Link | BW3074Small Starter Kit Safety Gateway in Stainless Steel |